Creating Prepayments for Accounts

You can apply a Prepayment/Commitment to an end customer Account for cases where the end customer has agreed to pay a fixed amount over the duration of their contract with you to consume one or more of your products or services. The amount is understood as payable regardless of the actual usage they become liable to pay for during the contract period. However, a Prepayment contrasts with a simple agreed minimum spend amount defined for an Account, since an agreed minimum spend will typically be assessed on a bill-by-bill basis whereas the Prepayment spans across multiple bills for the entire contract period. Depending on the payment use case you want to implement, you can exploit various configuration options when setting up Prepayments for your end-customer Accounts:

• If not all of an agreed Prepayment amount is paid at the start of a customer service period, you can choose one of two options for billing the outstanding fees due:
  • Select a Product Plan to bill with.
  • Define a schedule of billing dates.
• When setting up a Prepayment on an Account, you can include a surcharge rate to be applied for any overage on the Prepayment amount that occurs during the service period.

This topic provides an example to illustrate how any Prepayments/Commitments you apply to a customer Account will be handled in m3ter for Billing against the Account, and explains how you can create Prepayments for your customer Accounts:

• Example Prepayment
• Creating Prepayments
• Prepayment Billing with a Plan
• Prepayment Billing on a Schedule

When you have created Prepayments for Accounts, you can open a details page to check fees and usage, fee dates, review a chart that tracks Prepayment consumption over the active period for the Account, and review the Prepayment’s metadata:

• Viewing Prepayment Details

If you want to renew a contract with an existing end customer Account and want to include a Prepayment in the customer’s contract renewal, you can quickly duplicate either an active or pending Prepayment you’ve already created for the Account:

• Duplicating Prepayments

If you want to add a Prepayment to or remove it from a Contract on the Account, you can quickly do this from the Prepayment details page:

• Adding Prepayments to or Removing from Contracts

If you have linked an Account Plan attached to the Account to a Contract and you want to ensure the Prepayment is available for draw-down against billed charges on the Account, you must link the Prepayment to the same Contract:

• Linking Prepayments to Contracts - Availability for Draw-Down

If you have added both Prepayment and Balance credit amounts to an Account, you can define the order in which these credits amount are drawn-down against for billing the Account:

• Prepayments Draw-Down Order Against Balances

​

Example Prepayment

Suppose you have a customer who has agreed to pay a fixed amount over a year’s contract for one of your products, say $15,000, and to pay this total incrementally over the 12-month term in equal monthly billed amounts of $1,250. You charge for your product on the basis of transactions at a rate of $0.46 per transaction. The customer also agrees to pay a surcharge of 1% for any transactions payable over the agreed Prepayment amount:

• Month 1. The Account logs 20,000 transactions. At $0.46 per transaction this comes to $9,200 chargeable. This usage remains below the agreed Prepayment for the Account, so the transactions charge for usage is $0. However, the regular monthly amount of $1,250 is still due and the Bill for this first month is issued in this amount.
• Month 2. The Account makes another 20,000 transactions. At $0.46 per transaction this comes to a further $9,200 chargeable. The total chargeable is therefore $18,400, which exceeds the Prepayment amount by $3,400. Since a surcharge on any overage of 1% was agreed, this becomes $3,434. So the Bill for this second month is issued in the amount of: $1,250 + $3,434 = $4,684.
• Month 3. The Account makes another 20,000 transactions. At $0.46 per transaction this comes to a further $9,200 chargeable. The cumulative chargeable over the three-month period is now $27,600, which exceeds the Prepayment amount by $12,600. The monthly overage for this month is $12,600 - $3,400 = $9,200, since month two’s overage of $3,400 was charged under that month’s Bill. With the overage surcharge applied, this month’s usage charge is $9,292. So the Bill for this month is issued in the amount of: $1,250 + $9,292 = $10,542.

​

Creating Prepayments

You can create Prepayments for an end customer Account from the Account page. To create a Prepayment for an Account:

1. Select Accounts. The Accounts page opens.
2. Select the Name text of the Account for which you want to create a Prepayment. The Account page opens.
3. On the Account actions menu, select Prepayments>Create prepayment:

Alternatively:

• Select the Prepayments tab.
• On the Active and pending prepayments panel, select Create prepayment.

The Create page opens.

4. Enter the required Prepayment details:

• Start date (inclusive) and End date (exclusive). Use the popup calendars to select. (Required)
  • Note that the end date is treated exclusively and will be applied as midnight of the selected date, where midnight is understood as the start of that date. This means that if you set the End date of June 1st 2022, then the Prepayment ceases to be active for the Account at the end of May 31st 2022, and any prepayment fees due are calculated up to that point in time.
• Accounting product. Use the drop-down to select a Product. (Required)
  • You can use this to link the Prepayment on the Account to a particular Product for accounting purposes:
    • If you omit a Draw-downs accounting product for Prepayment drawdown, then the Accounting product will be used for Prepayment consumed line items on Bills.
    • If you omit a Fees accounting product when setting up billing for the Prepayment - either for billing with a Plan or on a Schedule - then the Accounting product will be used for Prepayment fee line items on Bills.

• Currency. Use the drop-down list to select the currency you want to use for the Prepayment. (Required)
• Contract. (Optional) If you want to add the Prepayment to a Contract you’ve created for the Account, use the drop-down to select it. For more details on Contracts, see Creating Contracts for Accounts.

5. Enter the Billing configuration settings.

• Amount. Enter the Prepayment amount. (Required)
• Fully prepaid:
  • Enable this switch if the Prepayment is to be fully prepaid. The Billing Configuration panel will close since you don’t need to set up billing for any remainder amount that has not been prepaid. Move to Step 6 below for Prepayment Restrictions.
  • Leave this switch disabled if only some or none of the Prepayment amount is to be prepaid. The Billing Configuration panel remains open ready for you to set up billing for the remainder amount of the Prepayment amount minus any prepaid amount. Default setting.

• Since in this example, nothing is prepaid against the Prepayment amount, you’ll have to configure how you want to bill against the Prepayment for this Account. Two options:
  • Bill with plan. See following section for Prepayment Billing with Plan.
  • Bill on a schedule. See following section for Prepayment Billing on a Schedule.
• Amount pre-paid. Enter the amount prepaid against the Prepayment.

6. Enter Prepayment drawdown settings, which are optional:

• Draw-down Products. Use the drop-down to select any Products to which you want to apply the Prepayment.

• Draw-down charge types. Use the drop-down to select the types of charge that can draw-down against the Prepayment amount when the Account is billed. Six options:
  • Ad-hoc
  • Counter adjustment debit
  • Counter running total charge
  • Minimum spend
  • Standing charge
  • Usage

• Draw-downs accounting product. For accounting purposes, select a Product that will be linked to any Prepayment consumed line items on Bills. (Optional)
  • Note that if you leave this blank, then the Accounting product selected for the Prepayment will be used instead.

7. Enter the remaining Usage settings, which are optional:

• Usage description. Enter a custom description used for Bill line items for Prepayment consumption for usage.
  • Note that if you leave this blank, then a default description will be used. See Bill Line Items - Default Descriptions for details.
• Overage surcharge (%). Enter a value for the additional surcharge (in percent) added to bills for overages on the Prepayment:

• Overage description. Optionally, enter a custom description to be used for Bill line items for Prepayment overage surcharge:
  • Note that if you leave this blank, then a default description will be used. See Bill Line Items - Default Descriptions for details.
• Overage usage. If you have not entered a value for Overage surcharge (%) or you have entered a value of 0, you can use a switch to enable Separate bill line item for overage usage on Bills. This means that if a Prepayment amount has been consumed by an Account, any subsequent line items on Bills against the Account for usage will show as separate “overage usage” charges, not simply as “usage” charges. Note:
  • If you have entered a value other than 0 in the Overage surcharge (%) field, then this option will be grayed out and unavailable.
  • If you have set up overage pricing on a tiered pricing structure when pricing a Plan that will apply to billing for the Prepayment and you enable Separate bill line item for overage usage, then overage usage charges for separate line items will be rated according to this overage pricing.
• Account hierarchy drawdown mode. If the Account is either a Parent or a Child Account, you can control on which Bill Prepayment fee and draw-down line items will appear:
  • Drawdown parent account - bill line item per account. A separate bill line item per Account and appear as separate line items on the Parent Bill - one per Child. (Default)
  • Drawdown parent account - single bill line item for all accounts. A single bill line item for all Accounts and appears as a single separate line item on the Parent Bill.
  • Drawdown child account. Child Accounts are billed and appear as line items on each Child Account Bill.

8. Select Create prepayment. You are returned to the Prepayments tab, where the Prepayment is listed on the Active and pending prepayments panel:

​

Prepayment Billing with a Plan

If the customer Account has opted not to pay the agreed Prepayment in total upfront and the Amount pre-paid is less than the Prepayment Amount, then under Billing for remaining you can select to Bill with plan for the outstanding Prepayment amount. The Billing Configuration panel adjusts and you can enter billing details for adding line items for Prepayment fees to Bills in each billing period over the duration of the Prepayment:

• Plan. Use the drop-down to select which pricing Plan you want the Prepayment fees to be added for billing purposes. Note that this is to allow for cases where a customer Account has been placed on more than one pricing Plan, some of which are billed weekly and some of which are billed monthly.
• First bill fee. Enter a Prepayment fee amount to be paid in the first Bill. The remainder due under the Prepayment will be evenly split across subsequent Bills up to the end of the Prepayment contract period.
• Billing cycle date. Optional setting, which sets the date when the first Bill is created and acts as a reference for when in the applied billing frequency period subsequent bills for the Account are created:
  • For example, suppose a Plan is configured for monthly billing frequency. You then set a Billing cycle date of February 15th, 2022. The first Bill will be created for the Account on February 15th, and subsequent Bills created on the 15th of the months following for the remainder of the billing period - March 15th, April 15th, and so on.
  • If you leave this blank, then Epoch dates from your Organization’s configuration will be used as the Billing cycle date for the Account instead - see Viewing and Editing Organization Configuration.
• Fee billing interval. How often the Prepayment fees are applied to bills. For example, if the plan you’ve selected using the Bill with plan setting means that bills are issued every three months and the Fee billing interval is set to 2, then the Prepayment fees are applied every six months.
• Fee billing offset. Defines an offset for when the Prepayment fees are first applied to bills on the Account. For example, if the bill is issued every three months and the Fee billing offset is set to 0, then the charge is applied to the first bill (at three months); if set to 1, it would be applied to the next bill (at six months), and so on.
• Fee billing. Allows you to control whether any Prepayment fees due are billed in arrears or in advance:
  • Use organization-wide configuration. Default selection. If enabled, the setting selected at Organization level for Fee billing will be used - it will be shown in brackets. If you select either of the other two options, the Organization level setting will be overridden. See Viewing and Editing Organization Configuration.
  • Bill in arrears (end of each billing period)
  • Bill in advance (start of each billing period)
• Fees accounting product. For accounting purposes, select a Product that will be linked to any Prepayment fee line items on Bills. (Optional)
  • Note that if you leave this blank, then the Accounting product selected for the Prepayment will be used instead.
• Fee description. Optionally, enter a custom description used for Bill line items for Prepayment fees.
  • Note that if you leave this blank, then a default description will be used. See Bill Line Items - Default Descriptions for details.

​

Prepayment Billing on a Schedule

If the customer Account has opted not to pay the agreed Prepayment in total upfront and the Amount prepaid is less than the Prepayment Amount, then you can select to Bill on a schedule for the outstanding Prepayment amount. The Billing Configuration panel adjusts and you can set up a schedule for Bill dates where each Bill covers a portion of the outstanding Prepayment amount which will be used to cover usage for a defined service period.

1. Select Add. The Billing panel adjusts to allow you to enter the details of the first Bill:

• Date. Use the calendar pop-up to select the date of the first Bill.
• Amount. Enter the portion of the outstanding Prepayment amount that will be allocated for usage recorded during the defined service period of the first Bill.
• Service period start date (inclusive) and Service period end date (exclusive). Use the calendar pop-up to set the service period for the first Bill.

2. If you want to set up subsequent Bills for the schedule, select Add again and repeat step 1.

In this example, where the Prepayment spans two calendar years, we’ve set up a Bill schedule for two billing dates, each covering half of the outstanding Prepayment amount - one at the outset for the first year; the second on December 1st, which is a month before the second service period for billing commences on January 1st of the second calendar year.

3. Optional settings:

• Fees accounting product. For accounting purposes, select a Product that will be linked to any Prepayment fee line items on Bills.
  • Note that if you leave this blank, then the Accounting product selected for the Prepayment will be used instead.
• Fee description. Enter a custom description, which will appear against Bill line items for Prepayment fees.
  • Note that if you leave this blank, then a default description will be used. See Bill Line Items - Default Descriptions for details.

​

Viewing Prepayment Details

If you want to review a Prepayment on an Account, you can do this from the Prepayments tab by opening a Prepayment details page where you can also view:

• Fees and Usage
• Fee Dates
• Prepayment Consumption
• Prepayment metadata

To view Prepayment details:

1. Select Accounts. The Accounts page opens.
2. Select the Account for which you want to view the details of a Prepayment. The Account page opens with the Overview tab selected.
3. Select the Prepayments tab. The page adjusts and shows any active, pending, or previous Prepayments created for the Account.
4. Select the Amount text of the Prepayment whose details you want to review:

In this example, we’ve selected to open the details for an ACTIVE Prepayment on an Account. The Prepayment details page opens, where you can review the Prepayment:

• Details, including which user Created and which Last modified the Prepayment:

• Fees and usage details and Fee dates. For example:

5. If consumption data is available for the Prepayment, you can scroll down the details page and review a Prepayment consumption chart that shows:

• Actual consumption to date with consumption trend.
• Minimum expected consumption over the entire active period.
• The percentage active period passed with number of days remaining
• The percentage consumption with amount remaining.

Here’s an example: If a Prepayment is fully consumed and overages are incurred, then this is clearly shown, for example:

6. If you scroll further down the page, you can review Prepayment metadata:

Select External mappings - any existing mappings created for the Prepayment are listed:

• The External system and External table mapped to are shown - such as Netsuite - Item in the above example. The External entity ID mapped to is also shown.
• If a listed External mapping is linked to an Integration, under Linked integration a hotlink text will be shown which you can use to open the Integration.
• Under Actions, you can edit or delete the External mapping.
• If the Prepayment has multiple External mappings created for it, you can use Search external mappings to search by External table and External entity ID and filter the list.
• You can commence a workflow to Create external mapping for the Prepayment directly - see Creating and Managing External Mappings for Accounts for an example.

Select Integration runs - if you’ve set up an integration that synchronizes the Prepayment data with an external system, the date/time and status of the Latest integration run are shown. You can use a text hotlink to open details of this latest run or View all runs. See Reviewing Integration Run Details.

7. When you are finished viewing details, you can select to return to the main Prepayments tab.

​

Duplicating Prepayments

You can duplicate a Prepayment/Commitment you’ve created for an Account. This is useful if you want to renew a contract with an end-customer Account and again include a Prepayment amount in the contract but adjust some of the details, such as renew with reduced Prepayment. You can do this for either an Active or a Pending Prepayment. To duplicate a Prepayment for an Account:

1. Select Accounts. The Accounts page opens.
2. Select the Name text of the Account for which you want to create a Prepayment. The Account page opens with the Overview tab selected.
3. Select the Prepayments tab. On the Active and pending prepayments panel any active or pending Prepayments created for the Account are shown.
4. Select Duplicate for the Prepayment you want to duplicate for the Account:

The Create page opens and the details of the existing Prepayment are shown.

5. Edit the details as required for the duplicate.
6. Select Create prepayment. You are returned to the Prepayments tab and the duplicate Prepayment is listed.

​

Adding Prepayments to or Removing from Contracts

From a Prepayment details page, you can quickly add the Prepayment to or remove it from a Contract on the Account. This saves you having to open and edit the Prepayment. To add a Prepayment to or remove it from a Contract:

1. Select Accounts. The Accounts page opens.
2. Select the Name text of the Account for which you want to add a Prepayment to or remove from a Contract. The Account details page opens with the Overview tab selected.
3. Select the Prepayments tab.
4. Select the hotlink text of the Prepayment. The Prepayment details page opens:

• If the Prepayment has not been added to a Contract, an Add to contract button is available.
• If the Prepayment has been added to a Contract, a Remove from contract button is available.

5. To add the Prepayment to a Contract, select Add to contract. A Select contract modal opens and lists the Contracts created for the Account.
6. Select the Contract you want to add the Prepayment to and select Confirm. The modal closes and the Contract is shown under Prepayment details:

7. To remove a Prepayment from a Contract, select Remove from contract. A confirmation popup appears:

8. Select Remove to confirm. The popup closes and the Contract no longer shows under Prepayment details.

​

Linking Prepayments to Contracts - Availability for Draw-Down

Linking a Prepayment to a Contract on an Account is optional. However, if you have linked an Account Plan attached to the Account to a Contract and you want to ensure the Prepayment is available for draw-down against billed charges on the Account, you must link the Prepayment to the same Contract. The following table list the consequences for draw-down availability when linking Account Plans and Prepayments to Contracts:

​

Prepayments Draw-Down Order Against Balances

If you have added Prepayments and Balances as credits on an Account, you can define the order in which these credit amounts are drawn-down for billing the Account. Four options are available for this credit application order for Prepayments against Balances:

• Prepayment then balance. Draw-down against Prepayment credit before Balance credit. Default.
• Balance then prepayment. Draw-down against Balance credit before Prepayment credit.
• Prepayment only. Only draw-down against Prepayment credit.
• Balance only. Only draw-down against Balance credit.

You can configure this in two places:

• At Organization level as part of your Organization configuration. See Viewing and Editing Organization Configuration.
• At individual Account level when creating or editing the Account to which the Prepayments and Balances have been added under Bill settings. See Creating an Account.
• If you configure this at Account level, the Account level setting takes precedence over any setting at Organizational level.