This topic also includes a section designed to help you set up your QuickBooks system and configure the required External Mappings in preparation for sending Bills from m3ter through to your QuickBooks instance:
You can quickly set up a QuickBooks integration in the Console.
Notes:
QuickBooks or QuickBooks (Sandbox Mode)? The difference between these two integrations is selecting QuickBooks means an integration destination into your QuickBooks production environment, selecting QuickBooks (Sandbox Mode) means an integration destination into your QuickBooksSandbox environment. The configuration settings are the same for both destinations.
Accounting Products? Many line item types can be mapped to specific Accounting Products to serve your revenue recognition and accounting purposes. Where this is the case, the integration will use the assigned Accounting Products.
Reviewing Integration Runs! When you’ve set up an integration with QuickBooks for your Organization in your production environment, you can review details of the integration runs performed for the integration. See Reviewing Integration Run Details.
To create a m3ter - QuickBooks integration:
Select m3sh:
The Workflows page opens.
Select Integrations. The Integrations page opens with All selected by default
Select QuickBooks:
The m3sh / Integrations>QuickBooks page opens.
On the Configurations panel, select Configure new integration>Configure bill integration:
The Create page opens and the Entity type - Bill and External system - QuickBooks are shown at the top of the page.
Use the Global configuration panel to:
Enter a Name for the Integration. This is required and is useful if you intend to create multiple Integrations for the same External system/Entity Type and need to clearly differentiate them.
Select the Accounts you want the integration to apply to:
Account ids. Select the Accounts you want to include - all selected Accounts are treated as allowed for the integration.
Restricted account ids. Select the Accounts you want to exclude - all selected Accounts are treated as disallowed for the integration.
Notes:
If you want to include all Accounts in the integration, leave both Accounts ids and Restricted account ids empty.
Any filtering by Account ids you define using these settings to control which Accounts the integration runs for will be in addition to any filtering you define using the Account filter option - see the following step for Entity Configuration options.
Select Users for Email notifications if disabled:
Integration disabled notification users. Select Organization Users you want to receive an Email notification if the integration is automatically disabled.
Notes:
An integration is automatically disabled if there have been 20 successive previous error Event responses to earlier attempts to run the integration. See Reviewing and Resolving Integration Events for more details.
If you select Organization Users to receive an Email notification when the integration is automatically disabled, their User id will be listed under Configuration Data on the Integration Details page.
Use the Entity configuration panel to configure the m3ter entity you’ll be synchronizing with for the integration. In the case of a Bill integration, this entity will be the Bill generated for a customer Account in m3ter:
Only send bill on approval. Enable this if you only want Bills to be sent when they have been approved. If disabled, the Bill will be sent every time it is regenerated. Default is disabled. Note that:
The frequency of Bills sent will depend on the billing frequency defined for the Account Plan attached to the Account - such as daily/weekly/monthly/annually.
If an Account has a Prepayment on it and the billing for Prepayment fees is configured to run on a customized schedule, Bills will be sent when scheduled Bills are generated.
If a Bill is manually recalculated the updated Bill will be sent.
If you enable this, then the integration will not run for all Bill Jobs.
Use external mapping account code. Enable this if you want the integration to look in the External Mappings for the Account identifier code, which means you can use an external Id. If this is disabled, the m3ter Account Id is used. Default is disabled.
Excluded line item types. Optionally filter the Bill line item types you send to the destination system. For example, only send charges or credits and exclude all other line item types.
Account filter. Optionally, enter an expression that is run on the Account to determine whether or not the integration includes the Account. You can use this setting if you have multiple destinations for sending Bills outbound to your QuickBooks system. For example:
"customFields != null AND customFields.country == "UK""
In this example, the integration will include an Account only if you have created a Custom Field for the Account called country and given the field a value of UK.
Notes:
Other Account fields for Account filter expression? You can reference other fields on the Account object in the Account filter expression. For details and another example, see Managing Multiple Third Party Destinations for Integrations.
Additional filtering? Any global filtering you define using the settings to include/exclude Accounts for integration runs by Account ids will be in addition to any filtering you define using the Account filter option - see the previous step for Global Configuration.
Enforce external mappings for config. Optionally enable this if you want the integration to use only those external mappings specified as being for this configuration.
Use this setting if you want to set up multiple integrations for the same external system. You can then create separate external mappings for each integration from the details page of each integration, and these external mappings become Linked external mappings for the specific integration. See Creating Linked External Mappings.
Excluded products. Optionally filter the Bill line items you send to the external system. Any line items associated with the selected Products will be be excluded when the integration runs.
Note that if line items are mapped to a specific _Accounting Product_s, these will be used for filtering to exclude line items.
Excluded aggregations. Optionally filter the Bill line items you send to the external system. Any line items associated with the selected Aggregations will be be excluded when the integration runs.
Use the External system configuration panel to enter the settings specific to the external system. These settings include field mappings as well as other system-specific configurations:
Split usage line items. This setting determines how m3ter will create usage invoice items in QuickBooks. QuickBooks items can be mapped to a product, an aggregation/compound aggregation, or to an individual pricing band:
Item per usage band
Item per product
Item per aggregation
Quick books item mapping. This setting allows you to specify the QuickBooks item ID for mapping these line item types. If left blank, then the item will be sent to QuickBooks without being mapped to a product or service:
CREDIT_MEMO
DEBIT_MEMO
Send zero quantity line items. Enable this switch if you want zero quantity line items to be sent through to QuickBooks. Default is disabled.
Allow bank transfer payment. Enable this switch if you want to allow invoices to be paid with online bank transfers - corresponds to bank transfer online payment checkbox in QuickBooks. Default is disabled.
Allow credit card payment. Enable this switch if you want to allow invoices to be paid with credit cards - corresponds to Cards checkbox in QuickBooks. Default is disabled.
Bcc invoice email address. Enter the email address to be set as the BCC email address in QuickBooks invoices. (Optional)
Account manager email custom field. Enter the Account custom field name that contains the email address of the Account Manager. Used to populate the email CC field when an invoice is sent to QuickBooks. (Optional). See Working with Custom Fields.
Warning! Do not enter an email address directly into this field: You’ll receive an error message when you try to save or update the integration configuration.
Sort line items by. Optionally, select a property to sort line items by before they are sent out to the external system. Three options:
None
Subtotal
Aggregation ID
Strict line item mapping. Optionally, enable this switch if you want the integration to map Description, Quantity, and Unit price line item values directly to QuickBooks invoice items.
Possible rounding errors! If you enable Strict line item mapping, this might result in rounding errors for the originating Quantity or Unit price values being mapped directly.
Select Create integration. You are returned to the Integrations>QuickBooks page, where the integration is listed on the Configurations panel:
Setting Up Authentication for the Integration
When you’ve created a QuickBooks integration, you can select an Integration Credential you’ve created for authentication allowing the integration to connect with your QuickBooks system.To set up authentication for your m3ter - QuickBooks integration:
Select m3sh. The Workflows page opens.
Select Integrations. The Integrations page opens.
Select QuickBooks. The Integrations>QuickBooks page opens.
On the Configurations panel, select the Name hotlink text of the QuickBooks integration you want to set up authentication for. The Integration details page opens:
Notes:
A warning is shown that the integration is not yet connected to your QuickBooks system.
The ID of the integration configuration is shown at the bottom of the Details card, and you can copy the ID directly to your clipboard.
Select Connect credential. A Select credential modal appears.
Select Confirm. The modal closes and on Integrations details the integration now shows as CONNECTED:
The Credential used to connect the integration is shown.
If at any time you want to disconnect the integration, select Disconnect credential.
If you want to use a different Credential for connecting the integration, select Change credential. The Select credential modal appears and you can select a different Credential.
Tip: Testing your Integration Setup? Your QuickBooks integration is now available for use. However, it remains in Beta release and we strongly recommend you test the implementation in your m3ter Sandbox or QA environment before releasing it to your Production environment. See section 7. of our Terms of Service for Beta Usage.
Tip: Integrations API Calls? When you have set up your Quickbooks integration, you can review and manage the integration using a full set of API Calls. See the Integrations section of our API Reference Docs.
Setting up QuickBooks and Required External Mappings in m3ter
This section provides guidance on setting up QuickBooks and any required External Mappings in preparation for sending out Bills to QuickBooks.
Warning: Important - Please consult your QuickBooks Documentation! The instructions given in this section for setting-up your QuickBooks system to prepare for an outbound Bill integration with m3ter are intended for guidance only. We do not hold ourselves responsible for any changes made by QuickBooks, and strongly recommend that you consult the QuickBooks end user documentation as you perform this configuration and that you treat the QuickBooks documentation as authoritative.
To set up QuickBooks and configure External Mappings:Firstly, in you QuickBooks Sandbox:
In your QuickBooks Sandbox, create the Customer
Select Sales>Customers>New Customer.
Enter new Customer Name.
Go to Settings>Account and settings>Advanced:
Set Home Currency to match the default currency configured for your m3ter Organization.
Turn on Multicurrency if you intend to invoice in currencies other than your default currency, and then add these additional currencies.
Secondly, in your m3ter Organization
Select m3sh>External mappings. The External mappings page opens.
Select Create External mapping. The Create pages opens at Stage 1: Select mapping type.
Enter External mapping settings:
m3ter entity type. Select Account.
External system. Select QuickBooksSandbox.
Note that the External table drop-down will only be activated when you’ve selected an External system.
External Table. Select Customer.
Select Next. The Create page adjusts to show Stage 1: Select mapping type as completed and allowing you to perform Stage 2: Add mapping IDs.
Enter External mapping details:
m3ter entity. Select the m3ter Account you want to map to the QuickBooks Customer.
External entity ID. Enter the ID of the Customer object you’ve created in your QuickBooks Sandbox.
Tip: Possibles values might show! Note that if the possible values for the External entity ID field can be fetched for the External QuickBooks system, then you can use a drop-down list to select the value for this field from the list of possible values returned.
To check that your QuickBooks setup and External Mappings configuration is correct, you can now:
In your m3ter Organization, generate a Bill for the Account and then Approve the Bill. This will activate your QuickBooks integration and the Bill will be sent outbound to your QuickBooks system.
In your QuickBooks system, go to Sales>Invoices and confirm that an invoice has been created for the respective Customer and that line item amounts are correct.
{"docsConfig":{"theme":"aspen","$schema":"https://mintlify.com/docs.json","name":"m3ter Documentation","description":"Guides, learning resources and API reference for integrating with m3ter","colors":{"primary":"#4caf4c","dark":"#449d44"},"logo":{"light":"https://mintcdn.com/m3ter/t6C65JBQiQOFtjBy/images/m3ter-logo-blue-sf.svg?fit=max\u0026auto=format\u0026n=t6C65JBQiQOFtjBy\u0026q=85\u0026s=3928db28c84ec6950e43caf96e635d80","dark":"https://mintcdn.com/m3ter/t6C65JBQiQOFtjBy/images/m3ter-logo-white-sf.svg?fit=max\u0026auto=format\u0026n=t6C65JBQiQOFtjBy\u0026q=85\u0026s=a018cb782e49a2fbdd811276476d0605"},"favicon":"https://mintcdn.com/m3ter/T0RRts393DSUkWFc/favicon.svg?fit=max\u0026auto=format\u0026n=T0RRts393DSUkWFc\u0026q=85\u0026s=9492b54cc98df6775983b287b6f865cd","navbar":{"links":[{"href":"https://m3ter.freshdesk.com","label":"Support"},{"href":"https://console.m3ter.com","label":"Console"}],"primary":{"type":"button","label":"Schedule a demo","href":"https://www.m3ter.com/contact"}},"footer":{"socials":{"linkedin":"https://uk.linkedin.com/company/m3ter","x":"https://x.com/m3terHQ","github":"https://github.com/m3ter-com"},"links":[{"items":[{"label":"Website","href":"https://www.m3ter.com"},{"label":"Legal","href":"https://www.m3ter.com/legal"},{"label":"Security","href":"https://www.m3ter.com/security"},{"label":"Trust Center","href":"https://trust.m3ter.com"}]}]},"fonts":{"family":"Montserrat"},"icons":{"library":"lucide"},"styling":{"eyebrows":"breadcrumbs","latex":false},"integrations":{"ga4":{"measurementId":"G-V9C7TTPRQT"}},"contextual":{"options":["copy","view"],"display":"header"},"thumbnails":{"fonts":{"family":"Montserrat"}},"navigation":{"pages":[]}},"deployment":{"deploymentMetadataValue":{"subdomain":"m3ter","hasAudioNarration":false,"actualSubdomain":"m3ter","customDomains":["docs.m3ter.com"],"gitSource":{"type":"github","owner":"m3ter-com","repo":"m3ter-docs","deployBranch":"main","contentDirectory":"","isPrivate":true,"mountPath":"","label":""},"entitlements":{"AI_CHAT":{"status":"ENABLED"},"WEB_MCP":{"status":"ENABLED"},"NARRATION":{"status":"ENABLED"}},"buildId":"6afd7e9c7d9a0e231c56ca16","clientVersion":"0.0.4270","searchFilterCounts":[{"language":"default","tag":"Guides","count":402},{"language":"default","tag":"API Reference","count":397},{"language":"default","tag":"Endpoints","count":391},{"language":"default","tag":"Integrations","count":69},{"language":"default","tag":"m3sh Function Reference","count":66},{"language":"default","tag":"Synthetic functions","count":50},{"language":"default","tag":"m3ter","count":50},{"language":"default","tag":"m3sh","count":43},{"language":"default","tag":"End-Customer Accounts","count":27},{"language":"default","tag":"m3ter Connector for Salesforce","count":24}]},"assistantConfig":{"enableAskAiButton":true,"enableStarterQuestions":false,"enableAskAiSearchBar":false},"basePath":"","hasChatPermissions":true,"hasWebMcpPermissions":true,"toggles":[{"name":"kill-isr","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"custom-rbac-roles","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-mintlify-slack","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-integrations-settings","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"rbac-expansion","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-pr-grouping","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"custom-prefix","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"analytics-v7","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"user-flows-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"no-publish-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-onboarding","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving-live","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"stripTemperatureMiddleware","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"support-platform-pylon-zendesk","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"instant-rollback","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications-server","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-fable","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fixed-ai-action-pricing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"site-roles","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automation-resolve-merge-conflict","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"scoped-publishing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"mintql","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"page-level-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-version-history-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"billing-page-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"full-page-search","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workspace-projects","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"assistant-v5","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fork-pr-previews","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"revalidation-jwt","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-sso-scim","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"hobby-abuse-scan","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"dashboard-inbox","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-signup","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-dual-write","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-enabled","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"approve-review-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-metadata","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"sso-setup-deadline-banner","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-serve","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"live-agents","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"starter-pricing","enabled":true,"variant":{"name":"treatment","enabled":true,"payload":{"type":"string","value":"treatment"},"feature_enabled":true},"impressionData":false},{"name":"llms-txt-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"wildcard-email-auth","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false}],"googleFontsInlined":true},"customCss":[]}
{"page":{"pagePath":"guides/integrations/setting-up-integrations/configuring-quickbooks-integrations","slug":"/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations","pageMetadata":{"title":"Configuring QuickBooks Integrations","description":null,"href":"/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations"},"pageType":"default","mdx":{"mdxSource":{"compiledSource":"\"use strict\";const{Fragment:_Fragment,jsx:_jsx,jsxs:_jsxs}=arguments[0];const{useMDXComponents:_provideComponents}=arguments[0];function _createMdxContent(props){const _components={a:`a`,code:`code`,em:`em`,li:`li`,ol:`ol`,p:`p`,strong:`strong`,ul:`ul`,..._provideComponents(),...props.components},{Heading,OptimizedImage,Tip,Warning}=_components;if(!Heading)_missingMdxReference(`Heading`,true);if(!OptimizedImage)_missingMdxReference(`OptimizedImage`,true);if(!Tip)_missingMdxReference(`Tip`,true);if(!Warning)_missingMdxReference(`Warning`,true);return _jsxs(_Fragment,{children:[_jsx(_components.p,{children:`You can define integrations for sending your end customer Account Bills generated in m3ter outbound into your QuickBooks system:`}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`First, `,_jsx(_components.a,{href:`/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations#creating-the-integration`,children:`create the integration`}),`.`]}),`\n`,_jsxs(_components.li,{children:[`Second, `,_jsx(_components.a,{href:`/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations#setting-up-authentication-for-the-integration`,children:`set up authentication`}),` for the integration to connect with QuickBooks.`]}),`\n`]}),`\n`,_jsx(_components.p,{children:`This topic also includes a section designed to help you set up your QuickBooks system and configure the required External Mappings in preparation for sending Bills from m3ter through to your QuickBooks instance:`}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsx(_components.li,{children:_jsx(_components.a,{href:`/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations#setting-up-quickbooks-and-required-external-mappings`,children:`Setting up QuickBooks and Required External Mappings in m3ter`})}),`\n`]}),`\n`,_jsx(Heading,{level:`2`,id:`creating-the-integration`,children:`Creating the Integration`}),`\n`,_jsx(_components.p,{children:`You can quickly set up a QuickBooks integration in the Console.`}),`\n`,_jsxs(Tip,{children:[_jsx(_components.p,{children:_jsx(_components.strong,{children:`Notes:`})}),_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`QuickBooks or QuickBooks (Sandbox Mode)?`}),` The difference between these two integrations is selecting `,_jsx(_components.strong,{children:`QuickBooks`}),` means an integration destination into your QuickBooks `,_jsx(_components.em,{children:`production environment`}),`, selecting `,_jsx(_components.strong,{children:`QuickBooks (Sandbox Mode)`}),` means an integration destination into your `,_jsx(_components.strong,{children:`QuickBooks`}),` `,_jsx(_components.em,{children:`Sandbox environment`}),`. The configuration settings are the same for both destinations.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Accounting Products?`}),` Many line item types can be mapped to specific Accounting Products to serve your revenue recognition and accounting purposes. Where this is the case, the integration will use the assigned Accounting Products.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Reviewing Integration Runs!`}),` When you’ve set up an integration with QuickBooks for your Organization in your production environment, you can review details of the integration runs performed for the integration. See `,_jsx(_components.a,{href:`/guides/integrations/setting-up-integrations/reviewing-integration-run-details`,children:`Reviewing Integration Run Details`}),`.`]}),`\n`]})]}),`\n`,_jsx(_components.p,{children:_jsx(_components.strong,{children:`To create a m3ter - QuickBooks integration:`})}),`\n`,_jsxs(_components.ol,{children:[`\n`,_jsxs(_components.li,{children:[`Select `,_jsx(_components.strong,{children:`m3sh`}),`:`]}),`\n`]}),`\n`,_jsx(OptimizedImage,{src:`https://mintcdn.com/m3ter/gg3zPcB5MVj--Cnq/images/m3shMainNav1.png?fit=max\u0026auto=format\u0026n=gg3zPcB5MVj--Cnq\u0026q=85\u0026s=c26ad71debe6cffcd46844fa558e0e6f`,alt:`M3sh Main Nav1`,title:`M3sh Main Nav1`,style:{width:`8%`},\"data-og-width\":`61`,width:`61`,\"data-og-height\":`64`,height:`64`,\"data-path\":`images/m3shMainNav1.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/m3ter/gg3zPcB5MVj--Cnq/images/m3shMainNav1.png?w=280\u0026fit=max\u0026auto=format\u0026n=gg3zPcB5MVj--Cnq\u0026q=85\u0026s=fe3ac651321aa11df53b83b0fd230256 280w, https://mintcdn.com/m3ter/gg3zPcB5MVj--Cnq/images/m3shMainNav1.png?w=560\u0026fit=max\u0026auto=format\u0026n=gg3zPcB5MVj--Cnq\u0026q=85\u0026s=1f58ad93c04cdc3ed5cd3b76d4506472 560w, https://mintcdn.com/m3ter/gg3zPcB5MVj--Cnq/images/m3shMainNav1.png?w=840\u0026fit=max\u0026auto=format\u0026n=gg3zPcB5MVj--Cnq\u0026q=85\u0026s=517207d64345c42f2dc1dcde73630009 840w, https://mintcdn.com/m3ter/gg3zPcB5MVj--Cnq/images/m3shMainNav1.png?w=1100\u0026fit=max\u0026auto=format\u0026n=gg3zPcB5MVj--Cnq\u0026q=85\u0026s=d7887d92cf2fbee414d23c3870ebd40c 1100w, https://mintcdn.com/m3ter/gg3zPcB5MVj--Cnq/images/m3shMainNav1.png?w=1650\u0026fit=max\u0026auto=format\u0026n=gg3zPcB5MVj--Cnq\u0026q=85\u0026s=8f715eeb32d8670a864608e3c186de72 1650w, https://mintcdn.com/m3ter/gg3zPcB5MVj--Cnq/images/m3shMainNav1.png?w=2500\u0026fit=max\u0026auto=format\u0026n=gg3zPcB5MVj--Cnq\u0026q=85\u0026s=ae21cc3976cbf6a81e69ea0c9103a477 2500w`}),`\n`,_jsxs(_components.p,{children:[`The `,_jsx(_components.strong,{children:`Workflows`}),` page opens.`]}),`\n`,_jsxs(_components.ol,{start:`2`,children:[`\n`,_jsxs(_components.li,{children:[`Select `,_jsx(_components.strong,{children:`Integrations`}),`. The `,_jsx(_components.strong,{children:`Integrations`}),` page opens with `,_jsx(_components.strong,{children:`All`}),` selected by default`]}),`\n`,_jsxs(_components.li,{children:[`Select `,_jsx(_components.strong,{children:`QuickBooks`}),`:`]}),`\n`]}),`\n`,_jsx(OptimizedImage,{src:`https://mintcdn.com/m3ter/493OGH__HkaAb2Oj/images/IntegConfigs21D.png?fit=max\u0026auto=format\u0026n=493OGH__HkaAb2Oj\u0026q=85\u0026s=97c1923d11859dcd9c212175b98526b9`,alt:`Integ Configs21d`,title:`Integ Configs21d`,style:{width:`42%`},\"data-og-width\":`415`,width:`415`,\"data-og-height\":`371`,height:`371`,\"data-path\":`images/IntegConfigs21D.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/m3ter/493OGH__HkaAb2Oj/images/IntegConfigs21D.png?w=280\u0026fit=max\u0026auto=format\u0026n=493OGH__HkaAb2Oj\u0026q=85\u0026s=917257c2139d86527eeb52380e45047d 280w, https://mintcdn.com/m3ter/493OGH__HkaAb2Oj/images/IntegConfigs21D.png?w=560\u0026fit=max\u0026auto=format\u0026n=493OGH__HkaAb2Oj\u0026q=85\u0026s=2110ea5a0b896b4a8666024b596c96b6 560w, https://mintcdn.com/m3ter/493OGH__HkaAb2Oj/images/IntegConfigs21D.png?w=840\u0026fit=max\u0026auto=format\u0026n=493OGH__HkaAb2Oj\u0026q=85\u0026s=a9c7cb852eb0c002d420c3564d76e022 840w, https://mintcdn.com/m3ter/493OGH__HkaAb2Oj/images/IntegConfigs21D.png?w=1100\u0026fit=max\u0026auto=format\u0026n=493OGH__HkaAb2Oj\u0026q=85\u0026s=09c5a765cdc4a29a1be7b39758bdf8c2 1100w, https://mintcdn.com/m3ter/493OGH__HkaAb2Oj/images/IntegConfigs21D.png?w=1650\u0026fit=max\u0026auto=format\u0026n=493OGH__HkaAb2Oj\u0026q=85\u0026s=e39c87efb9b90ea5bc8ea84d05f4b612 1650w, https://mintcdn.com/m3ter/493OGH__HkaAb2Oj/images/IntegConfigs21D.png?w=2500\u0026fit=max\u0026auto=format\u0026n=493OGH__HkaAb2Oj\u0026q=85\u0026s=8e10bcc2c46f192ae48ab660f444787b 2500w`}),`\n`,_jsxs(_components.p,{children:[`The `,_jsx(_components.strong,{children:`m3sh / Integrations>QuickBooks`}),` page opens.`]}),`\n`,_jsxs(_components.ol,{start:`4`,children:[`\n`,_jsxs(_components.li,{children:[`On the `,_jsx(_components.strong,{children:`Configurations`}),` panel, select `,_jsx(_components.strong,{children:`Configure new integration>Configure bill integration`}),`:`]}),`\n`]}),`\n`,_jsx(OptimizedImage,{src:`https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs30A.png?fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=66ed2b251395a34365099bd1ca45f83e`,alt:`Integ Configs30a`,\"data-og-width\":`1223`,width:`1223`,\"data-og-height\":`416`,height:`416`,\"data-path\":`images/IntegConfigs30A.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs30A.png?w=280\u0026fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=5b131a878dcfc440e449c66b034b1733 280w, https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs30A.png?w=560\u0026fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=6b58b4cbd6fd9ccb030d67c5f150444a 560w, https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs30A.png?w=840\u0026fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=e7cac4928f27cb89bb650b7ff7ab1a76 840w, https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs30A.png?w=1100\u0026fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=69f3fce78b681c85dc02e131636c12d1 1100w, https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs30A.png?w=1650\u0026fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=ee9d8d2f9025318a5bcc11cbe88fa49e 1650w, https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs30A.png?w=2500\u0026fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=1ae5f2c3e79768a2addba5eafc2c49d0 2500w`}),`\n`,_jsxs(_components.p,{children:[`The `,_jsx(_components.strong,{children:`Create`}),` page opens and the `,_jsx(_components.strong,{children:`Entity type`}),` - `,_jsx(_components.strong,{children:`Bill`}),` and `,_jsx(_components.strong,{children:`External system`}),` - `,_jsx(_components.strong,{children:`QuickBooks`}),` are shown at the top of the page.`]}),`\n`,_jsxs(_components.ol,{start:`5`,children:[`\n`,_jsxs(_components.li,{children:[`Use the `,_jsx(_components.strong,{children:`Global configuration`}),` panel to:`]}),`\n`]}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`Enter a `,_jsx(_components.strong,{children:`Name`}),` for the Integration. This is required and is useful if you intend to create multiple Integrations for the same External system/Entity Type and need to clearly differentiate them.`]}),`\n`,_jsxs(_components.li,{children:[`Select the Accounts you want the integration to apply to:`,`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Account ids.`}),` Select the Accounts you want to include - all selected Accounts are treated as `,_jsx(_components.em,{children:`allowed`}),` for the integration.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Restricted account ids.`}),` Select the Accounts you want to exclude - all selected Accounts are treated as `,_jsx(_components.em,{children:`disallowed`}),` for the integration.`]}),`\n`]}),`\n`]}),`\n`]}),`\n`,_jsxs(Tip,{children:[_jsx(_components.p,{children:_jsx(_components.strong,{children:`Notes:`})}),_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`If you want to include `,_jsx(_components.em,{children:`all Accounts`}),` in the integration, leave both `,_jsx(_components.strong,{children:`Accounts ids`}),` and `,_jsx(_components.strong,{children:`Restricted account ids`}),` empty.`]}),`\n`,_jsxs(_components.li,{children:[`Any filtering by `,_jsx(_components.strong,{children:`Account ids`}),` you define using these settings to control which Accounts the integration runs for will be `,_jsx(_components.em,{children:`in addition`}),` to any filtering you define using the `,_jsx(_components.strong,{children:`Account filter`}),` option - see the following step for `,_jsx(_components.strong,{children:`Entity Configuration`}),` options.`]}),`\n`]})]}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`Select Users for Email notifications if disabled:`,`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Integration disabled notification users`}),`. Select Organization Users you want to receive an Email notification if the integration is automatically disabled.`]}),`\n`]}),`\n`]}),`\n`]}),`\n`,_jsxs(Tip,{children:[_jsx(_components.p,{children:_jsx(_components.strong,{children:`Notes:`})}),_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`An integration is automatically disabled if there have been 20 successive previous error Event responses to earlier attempts to run the integration. See `,_jsx(_components.a,{href:`/guides/integrations/setting-up-integrations/reviewing-and-resolving-integration-events`,children:`Reviewing and Resolving Integration Events`}),` for more details.`]}),`\n`,_jsxs(_components.li,{children:[`If you select Organization Users to receive an Email notification when the integration is automatically disabled, their User id will be listed under `,_jsx(_components.strong,{children:`Configuration Data`}),` on the `,_jsx(_components.strong,{children:`Integration Details`}),` page.`]}),`\n`]})]}),`\n`,_jsxs(_components.ol,{start:`6`,children:[`\n`,_jsxs(_components.li,{children:[`Use the `,_jsx(_components.strong,{children:`Entity configuration`}),` panel to configure the m3ter entity you’ll be synchronizing with for the integration. In the case of a Bill integration, this entity will be the Bill generated for a customer Account in m3ter:`]}),`\n`]}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Only send bill on approval.`}),` Enable this if you only want Bills to be sent when they have been approved. If disabled, the Bill will be sent every time it is regenerated. Default is disabled. Note that:`,`\n`,_jsxs(_components.ul,{children:[`\n`,_jsx(_components.li,{children:`The frequency of Bills sent will depend on the billing frequency defined for the Account Plan attached to the Account - such as daily/weekly/monthly/annually.`}),`\n`,_jsx(_components.li,{children:`If an Account has a Prepayment on it and the billing for Prepayment fees is configured to run on a customized schedule, Bills will be sent when scheduled Bills are generated.`}),`\n`,_jsx(_components.li,{children:`If a Bill is manually recalculated the updated Bill will be sent.`}),`\n`,_jsxs(_components.li,{children:[`If you enable this, then the integration will not run for `,_jsx(_components.em,{children:`all Bill Jobs`}),`.`]}),`\n`]}),`\n`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Use external mapping account code.`}),` Enable this if you want the integration to look in the External Mappings for the Account identifier code, which means you can use an external Id. If this is disabled, the m3ter Account Id is used. Default is disabled.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Excluded line item types.`}),` Optionally filter the Bill line item types you send to the destination system. For example, only send charges or credits and exclude all other line item types.`,`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`For details of line item types, see `,_jsx(_components.a,{href:`/guides/billing-and-usage-data/running-viewing-and-managing-bills/bill-line-item-types`,children:`Bill Line Item Types`}),`.`]}),`\n`]}),`\n`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Account filter`}),`. Optionally, enter an expression that is run on the Account to determine whether or not the integration includes the Account. You can use this setting if you have multiple destinations for sending Bills outbound to your QuickBooks system. For example:`,`\n`,_jsxs(_components.ul,{children:[`\n`,_jsx(_components.li,{children:_jsx(_components.code,{children:`\"customFields != null AND customFields.country == \"UK\"\"`})}),`\n`,_jsxs(_components.li,{children:[`In this example, the integration will include an Account `,_jsx(_components.em,{children:`only if`}),` you have created a Custom Field for the Account called `,_jsx(_components.em,{children:`country`}),` and given the field a value of `,_jsx(_components.em,{children:`UK`}),`.`]}),`\n`]}),`\n`]}),`\n`]}),`\n`,_jsxs(Tip,{children:[_jsx(_components.p,{children:_jsx(_components.strong,{children:`Notes:`})}),_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Other Account fields for Account filter expression?`}),` You can reference other fields on the Account object in the `,_jsx(_components.strong,{children:`Account filter`}),` expression. For details and another example, see `,_jsx(_components.a,{href:`/guides/integrations/setting-up-integrations/managing-multiple-destinations-for-integrations`,children:`Managing Multiple Third Party Destinations for Integrations`}),`.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Additional filtering?`}),` Any global filtering you define using the settings to include/exclude Accounts for integration runs by `,_jsx(_components.strong,{children:`Account ids`}),` will be `,_jsx(_components.em,{children:`in addition`}),` to any filtering you define using the `,_jsx(_components.strong,{children:`Account filter`}),` option - see the previous step for `,_jsx(_components.strong,{children:`Global Configuration`}),`.`]}),`\n`]})]}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Enforce external mappings for config`}),`. Optionally enable this if you want the integration to use only those external mappings specified as being for this configuration.`,`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`Use this setting if you want to set up multiple integrations for the same external system. You can then create separate external mappings for each integration from the details page of each integration, and these external mappings become `,_jsx(_components.strong,{children:`Linked external mappings`}),` for the specific integration. See `,_jsx(_components.a,{href:`/guides/integrations/setting-up-integrations/creating-and-managing-external-mappings#creating-linked-external-mappings`,children:`Creating Linked External Mappings`}),`.`]}),`\n`]}),`\n`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Excluded products`}),`. Optionally filter the Bill line items you send to the external system. Any line items associated with the selected Products will be be excluded when the integration runs.`,`\n`,_jsxs(_components.ul,{children:[`\n`,_jsx(_components.li,{children:`Note that if line items are mapped to a specific _Accounting Product_s, these will be used for filtering to exclude line items.`}),`\n`]}),`\n`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Excluded aggregations`}),`. Optionally filter the Bill line items you send to the external system. Any line items associated with the selected Aggregations will be be excluded when the integration runs.`]}),`\n`]}),`\n`,_jsxs(_components.ol,{start:`7`,children:[`\n`,_jsxs(_components.li,{children:[`Use the `,_jsx(_components.strong,{children:`External system configuration`}),` panel to enter the settings specific to the external system. These settings include field mappings as well as other system-specific configurations:`]}),`\n`]}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Split usage line items.`}),` This setting determines how m3ter will create usage invoice items in QuickBooks. QuickBooks items can be mapped to a product, an aggregation/compound aggregation, or to an individual pricing band:`,`\n`,_jsxs(_components.ul,{children:[`\n`,_jsx(_components.li,{children:_jsx(_components.strong,{children:`Item per usage band`})}),`\n`,_jsx(_components.li,{children:_jsx(_components.strong,{children:`Item per product`})}),`\n`,_jsx(_components.li,{children:_jsx(_components.strong,{children:`Item per aggregation`})}),`\n`]}),`\n`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Quick books item mapping`}),`. This setting allows you to specify the QuickBooks item ID for mapping these line item types. If left blank, then the item will be sent to QuickBooks without being mapped to a product or service:`,`\n`,_jsxs(_components.ul,{children:[`\n`,_jsx(_components.li,{children:_jsx(_components.strong,{children:`CREDIT_MEMO`})}),`\n`,_jsx(_components.li,{children:_jsx(_components.strong,{children:`DEBIT_MEMO`})}),`\n`]}),`\n`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Send zero quantity line items`}),`. Enable this switch if you want zero quantity line items to be sent through to QuickBooks. Default is disabled.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Allow bank transfer payment`}),`. Enable this switch if you want to allow invoices to be paid with online bank transfers - corresponds to `,_jsx(_components.em,{children:`bank transfer online payment`}),` checkbox in QuickBooks. Default is disabled.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Allow credit card payment`}),`. Enable this switch if you want to allow invoices to be paid with credit cards - corresponds to `,_jsx(_components.em,{children:`Cards`}),` checkbox in QuickBooks. Default is disabled.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Bcc invoice email address`}),`. Enter the email address to be set as the `,_jsx(_components.em,{children:`BCC email address`}),` in QuickBooks invoices. (`,_jsx(_components.em,{children:`Optional`}),`)`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Account manager email custom field`}),`. Enter the Account custom field name that contains the email address of the Account Manager. Used to populate the email CC field when an invoice is sent to QuickBooks. (`,_jsx(_components.em,{children:`Optional`}),`). See `,_jsx(_components.a,{href:`/guides/creating-and-managing-products/working-with-custom-fields`,children:`Working with Custom Fields.`})]}),`\n`]}),`\n`,_jsx(Warning,{children:_jsxs(_components.p,{children:[_jsx(_components.strong,{children:`Warning! Do not enter an email address directly into this field:`}),` You’ll receive an error message when you try to save or update the integration configuration.`]})}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Sort line items by`}),`. Optionally, select a property to sort line items by before they are sent out to the external system. Three options:`,`\n`,_jsxs(_components.ul,{children:[`\n`,_jsx(_components.li,{children:_jsx(_components.strong,{children:`None`})}),`\n`,_jsx(_components.li,{children:_jsx(_components.strong,{children:`Subtotal`})}),`\n`,_jsx(_components.li,{children:_jsx(_components.strong,{children:`Aggregation ID`})}),`\n`]}),`\n`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Strict line item mapping`}),`. Optionally, enable this switch if you want the integration to map `,_jsx(_components.strong,{children:`Description`}),`, `,_jsx(_components.strong,{children:`Quantity`}),`, and `,_jsx(_components.strong,{children:`Unit price`}),` line item values directly to QuickBooks invoice items.`]}),`\n`]}),`\n`,_jsx(Warning,{children:_jsxs(_components.p,{children:[_jsx(_components.strong,{children:`Possible rounding errors!`}),` If you enable `,_jsx(_components.strong,{children:`Strict line item mapping`}),`, this might result in rounding errors for the originating `,_jsx(_components.strong,{children:`Quantity`}),` or `,_jsx(_components.strong,{children:`Unit price`}),` values being mapped directly.`]})}),`\n`,_jsxs(_components.ol,{start:`8`,children:[`\n`,_jsxs(_components.li,{children:[`Select `,_jsx(_components.strong,{children:`Create integration`}),`. You are returned to the `,_jsx(_components.strong,{children:`Integrations>QuickBooks`}),` page, where the integration is listed on the `,_jsx(_components.strong,{children:`Configurations`}),` panel:`]}),`\n`]}),`\n`,_jsx(OptimizedImage,{src:`https://mintcdn.com/m3ter/mC89AON4X0ckKhXt/images/1750080669-quickbooksintegs1.png?fit=max\u0026auto=format\u0026n=mC89AON4X0ckKhXt\u0026q=85\u0026s=47df0c9b64a827f19d54af8d82739e9a`,style:{maxWidth:`min(850px, 100%)`},\"data-og-width\":`1184`,width:`1184`,\"data-og-height\":`250`,height:`250`,\"data-path\":`images/1750080669-quickbooksintegs1.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/m3ter/mC89AON4X0ckKhXt/images/1750080669-quickbooksintegs1.png?w=280\u0026fit=max\u0026auto=format\u0026n=mC89AON4X0ckKhXt\u0026q=85\u0026s=c9d10b5032831ce91354071349661c16 280w, https://mintcdn.com/m3ter/mC89AON4X0ckKhXt/images/1750080669-quickbooksintegs1.png?w=560\u0026fit=max\u0026auto=format\u0026n=mC89AON4X0ckKhXt\u0026q=85\u0026s=c924cf53206c28f68f44cc549444a3f8 560w, https://mintcdn.com/m3ter/mC89AON4X0ckKhXt/images/1750080669-quickbooksintegs1.png?w=840\u0026fit=max\u0026auto=format\u0026n=mC89AON4X0ckKhXt\u0026q=85\u0026s=98ca66658403b8205cc86753afc08cea 840w, https://mintcdn.com/m3ter/mC89AON4X0ckKhXt/images/1750080669-quickbooksintegs1.png?w=1100\u0026fit=max\u0026auto=format\u0026n=mC89AON4X0ckKhXt\u0026q=85\u0026s=40317020e12f1e223ed44810c2f3c05b 1100w, https://mintcdn.com/m3ter/mC89AON4X0ckKhXt/images/1750080669-quickbooksintegs1.png?w=1650\u0026fit=max\u0026auto=format\u0026n=mC89AON4X0ckKhXt\u0026q=85\u0026s=9e572d965ed163265a09e4278cccc0e1 1650w, https://mintcdn.com/m3ter/mC89AON4X0ckKhXt/images/1750080669-quickbooksintegs1.png?w=2500\u0026fit=max\u0026auto=format\u0026n=mC89AON4X0ckKhXt\u0026q=85\u0026s=37ec37bf59e48bc60c6bb4f76099920a 2500w`}),`\n`,_jsx(Heading,{level:`2`,id:`setting-up-authentication-for-the-integration`,children:`Setting Up Authentication for the Integration`}),`\n`,_jsx(_components.p,{children:`When you’ve created a QuickBooks integration, you can select an Integration Credential you’ve created for authentication allowing the integration to connect with your QuickBooks system.`}),`\n`,_jsx(_components.p,{children:_jsx(_components.strong,{children:`To set up authentication for your m3ter - QuickBooks integration:`})}),`\n`,_jsxs(_components.ol,{children:[`\n`,_jsxs(_components.li,{children:[`Select `,_jsx(_components.strong,{children:`m3sh`}),`. The `,_jsx(_components.strong,{children:`Workflows`}),` page opens.`]}),`\n`,_jsxs(_components.li,{children:[`Select `,_jsx(_components.strong,{children:`Integrations`}),`. The `,_jsx(_components.strong,{children:`Integrations`}),` page opens.`]}),`\n`,_jsxs(_components.li,{children:[`Select `,_jsx(_components.strong,{children:`QuickBooks`}),`. The `,_jsx(_components.strong,{children:`Integrations>QuickBooks`}),` page opens.`]}),`\n`,_jsxs(_components.li,{children:[`On the `,_jsx(_components.strong,{children:`Configurations`}),` panel, select the `,_jsx(_components.strong,{children:`Name`}),` hotlink text of the QuickBooks integration you want to set up authentication for. The `,_jsx(_components.strong,{children:`Integration details`}),` page opens:`]}),`\n`]}),`\n`,_jsx(OptimizedImage,{src:`https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs45A.png?fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=fb46ab732b99475fef35a079c0fcd126`,alt:`Integ Configs45a`,\"data-og-width\":`1258`,width:`1258`,\"data-og-height\":`791`,height:`791`,\"data-path\":`images/IntegConfigs45A.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs45A.png?w=280\u0026fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=e9b3665aa4302f323997584f5a3bce2a 280w, https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs45A.png?w=560\u0026fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=2874f1650abc75d0aff01b82fb1d6dcd 560w, https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs45A.png?w=840\u0026fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=d187d1a82fc0587617fda151fbdb4800 840w, https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs45A.png?w=1100\u0026fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=a6d04c47d841561a0bbdc1afe673c6d8 1100w, https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs45A.png?w=1650\u0026fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=b5dacda0b146ff6260233a140c5aca5b 1650w, https://mintcdn.com/m3ter/_WrggqO-h-Q_N-7Q/images/IntegConfigs45A.png?w=2500\u0026fit=max\u0026auto=format\u0026n=_WrggqO-h-Q_N-7Q\u0026q=85\u0026s=0e6f6d28de2efe6a2d5a87473645bb79 2500w`}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`Notes:`,`\n`,_jsxs(_components.ul,{children:[`\n`,_jsx(_components.li,{children:`A warning is shown that the integration is not yet connected to your QuickBooks system.`}),`\n`,_jsxs(_components.li,{children:[`The `,_jsx(_components.strong,{children:`ID`}),` of the integration configuration is shown at the bottom of the `,_jsx(_components.strong,{children:`Details`}),` card, and you can copy the `,_jsx(_components.strong,{children:`ID`}),` directly to your clipboard.`]}),`\n`]}),`\n`]}),`\n`]}),`\n`,_jsxs(_components.ol,{start:`5`,children:[`\n`,_jsxs(_components.li,{children:[`Select `,_jsx(_components.strong,{children:`Connect credential`}),`. A `,_jsx(_components.strong,{children:`Select credential`}),` modal appears.`]}),`\n`,_jsxs(_components.li,{children:[`Select a Credential you created earlier and want to use to authenticate the integration with QuickBooks. See `,_jsx(_components.a,{href:`/guides/integrations/setting-up-integrations/_managing-integration-credentials-legacy/creating-quickbooks-integration-credentials`,children:`Creating QuickBooks Integration Credentials`}),`.`]}),`\n`,_jsxs(_components.li,{children:[`Select `,_jsx(_components.strong,{children:`Confirm`}),`. The modal closes and on `,_jsx(_components.strong,{children:`Integrations details`}),` the integration now shows as `,_jsx(_components.strong,{children:`CONNECTED`}),`:`]}),`\n`]}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsx(_components.li,{children:`The Credential used to connect the integration is shown.`}),`\n`,_jsxs(_components.li,{children:[`If at any time you want to disconnect the integration, select `,_jsx(_components.strong,{children:`Disconnect credential`}),`.`]}),`\n`,_jsxs(_components.li,{children:[`If you want to use a different Credential for connecting the integration, select `,_jsx(_components.strong,{children:`Change credential`}),`. The `,_jsx(_components.strong,{children:`Select credential`}),` modal appears and you can select a different Credential.`]}),`\n`]}),`\n`,_jsx(Tip,{children:_jsxs(_components.p,{children:[_jsx(_components.strong,{children:`Tip: Testing your Integration Setup?`}),` Your QuickBooks integration is now available for use. However, it remains in Beta release and we strongly recommend you test the implementation in your m3ter Sandbox or QA environment before releasing it to your Production environment. See section 7. of our `,_jsx(_components.a,{href:`https://www.m3ter.com/docs/legal/terms-of-service`,children:`Terms of Service`}),` for Beta Usage.`]})}),`\n`,_jsx(Tip,{children:_jsxs(_components.p,{children:[_jsx(_components.strong,{children:`Tip: Integrations API Calls?`}),` When you have set up your Quickbooks integration, you can review and manage the integration using a full set of API Calls. See the `,_jsx(_components.a,{href:`/api/integrations/introduction`,children:`Integrations section`}),` of our API Reference Docs.`]})}),`\n`,_jsx(Heading,{level:`2`,id:`setting-up-quickbooks-and-required-external-mappings-in-m3ter`,children:`Setting up QuickBooks and Required External Mappings in m3ter`}),`\n`,_jsx(_components.p,{children:`This section provides guidance on setting up QuickBooks and any required External Mappings in preparation for sending out Bills to QuickBooks.`}),`\n`,_jsx(Warning,{children:_jsxs(_components.p,{children:[_jsx(_components.strong,{children:`Warning: Important - Please consult your QuickBooks Documentation!`}),` The instructions given in this section for setting-up your QuickBooks system to prepare for an outbound Bill integration with m3ter are intended for `,_jsx(_components.em,{children:`guidance only`}),`. We do not hold ourselves responsible for any changes made by QuickBooks, and `,_jsx(_components.em,{children:`strongly recommend`}),` that you consult the QuickBooks end user documentation as you perform this configuration and that you treat the QuickBooks documentation as authoritative.`]})}),`\n`,_jsx(_components.p,{children:_jsx(_components.strong,{children:`To set up QuickBooks and configure External Mappings:`})}),`\n`,_jsx(_components.p,{children:`Firstly, in you QuickBooks Sandbox:`}),`\n`,_jsxs(_components.ol,{children:[`\n`,_jsx(_components.li,{children:`In your QuickBooks Sandbox, create the Customer`}),`\n`]}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`Select `,_jsx(_components.strong,{children:`Sales>Customers>New Customer`}),`.`]}),`\n`,_jsxs(_components.li,{children:[`Enter new `,_jsx(_components.strong,{children:`Customer Name`}),`.`]}),`\n`]}),`\n`,_jsxs(_components.ol,{start:`2`,children:[`\n`,_jsxs(_components.li,{children:[`Go to `,_jsx(_components.strong,{children:`Settings>Account`}),` and `,_jsx(_components.strong,{children:`settings>Advanced`}),`:`]}),`\n`]}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`Set `,_jsx(_components.strong,{children:`Home Currency`}),` to match the default currency configured for your m3ter Organization.`]}),`\n`,_jsxs(_components.li,{children:[`Turn on `,_jsx(_components.strong,{children:`Multicurrency`}),` if you intend to invoice in currencies other than your default currency, and then add these additional currencies.`]}),`\n`]}),`\n`,_jsx(_components.p,{children:`Secondly, in your m3ter Organization`}),`\n`,_jsxs(_components.ol,{children:[`\n`,_jsxs(_components.li,{children:[`Select `,_jsx(_components.strong,{children:`m3sh>External mappings`}),`. The `,_jsx(_components.strong,{children:`External mappings`}),` page opens.`]}),`\n`,_jsxs(_components.li,{children:[`Select `,_jsx(_components.strong,{children:`Create External mapping`}),`. The `,_jsx(_components.strong,{children:`Create`}),` pages opens at `,_jsx(_components.strong,{children:`Stage 1: Select mapping type`}),`.`]}),`\n`,_jsxs(_components.li,{children:[`Enter `,_jsx(_components.strong,{children:`External mapping settings`}),`:`]}),`\n`]}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`m3ter entity type`}),`. Select `,_jsx(_components.strong,{children:`Account`}),`.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`External system`}),`. Select `,_jsx(_components.strong,{children:`QuickBooksSandbox`}),`.`,`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`Note that the `,_jsx(_components.strong,{children:`External table`}),` drop-down will only be activated when you’ve selected an `,_jsx(_components.strong,{children:`External system`}),`.`]}),`\n`]}),`\n`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`External Table`}),`. Select `,_jsx(_components.strong,{children:`Customer`}),`.`]}),`\n`]}),`\n`,_jsx(OptimizedImage,{src:`https://mintcdn.com/m3ter/r3D0c1hhAuooaNQf/images/1727449089-extmapping39a.png?fit=max\u0026auto=format\u0026n=r3D0c1hhAuooaNQf\u0026q=85\u0026s=c0becc9c0ac5d28033384759cc0b71de`,style:{maxWidth:`min(450px, 100%)`},\"data-og-width\":`657`,width:`657`,\"data-og-height\":`605`,height:`605`,\"data-path\":`images/1727449089-extmapping39a.png`,\"data-optimize\":`true`,\"data-opv\":`3`,srcset:`https://mintcdn.com/m3ter/r3D0c1hhAuooaNQf/images/1727449089-extmapping39a.png?w=280\u0026fit=max\u0026auto=format\u0026n=r3D0c1hhAuooaNQf\u0026q=85\u0026s=6593bd4d79e63f5a72013e5dc2b49be2 280w, https://mintcdn.com/m3ter/r3D0c1hhAuooaNQf/images/1727449089-extmapping39a.png?w=560\u0026fit=max\u0026auto=format\u0026n=r3D0c1hhAuooaNQf\u0026q=85\u0026s=741c8e9646939a4e1893b60fea98804b 560w, https://mintcdn.com/m3ter/r3D0c1hhAuooaNQf/images/1727449089-extmapping39a.png?w=840\u0026fit=max\u0026auto=format\u0026n=r3D0c1hhAuooaNQf\u0026q=85\u0026s=4d89021ba69759b49883b37d75f549c7 840w, https://mintcdn.com/m3ter/r3D0c1hhAuooaNQf/images/1727449089-extmapping39a.png?w=1100\u0026fit=max\u0026auto=format\u0026n=r3D0c1hhAuooaNQf\u0026q=85\u0026s=10d8d4938bd45215c2c3296aa57adc15 1100w, https://mintcdn.com/m3ter/r3D0c1hhAuooaNQf/images/1727449089-extmapping39a.png?w=1650\u0026fit=max\u0026auto=format\u0026n=r3D0c1hhAuooaNQf\u0026q=85\u0026s=8c11317485fee2128ce17a0327c4b463 1650w, https://mintcdn.com/m3ter/r3D0c1hhAuooaNQf/images/1727449089-extmapping39a.png?w=2500\u0026fit=max\u0026auto=format\u0026n=r3D0c1hhAuooaNQf\u0026q=85\u0026s=48e866d65ae61ee38019c5470587145e 2500w`}),`\n`,_jsxs(_components.ol,{start:`4`,children:[`\n`,_jsxs(_components.li,{children:[`Select `,_jsx(_components.strong,{children:`Next`}),`. The `,_jsx(_components.strong,{children:`Create`}),` page adjusts to show `,_jsx(_components.strong,{children:`Stage 1: Select mapping type`}),` as completed and allowing you to perform `,_jsx(_components.strong,{children:`Stage 2: Add mapping IDs`}),`.`]}),`\n`,_jsxs(_components.li,{children:[`Enter `,_jsx(_components.strong,{children:`External mapping details`}),`:`]}),`\n`]}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`m3ter entity`}),`. Select the m3ter Account you want to map to the QuickBooks Customer.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`External entity ID`}),`. Enter the ID of the `,_jsx(_components.strong,{children:`Customer`}),` object you’ve created in your QuickBooks Sandbox.`]}),`\n`]}),`\n`,_jsx(Tip,{children:_jsxs(_components.p,{children:[_jsx(_components.strong,{children:`Tip: Possibles values might show!`}),` Note that if the possible values for the `,_jsx(_components.strong,{children:`External entity ID`}),` field can be fetched for the `,_jsx(_components.strong,{children:`External QuickBooks system`}),`, then you can use a drop-down list to select the value for this field from the list of possible values returned.`]})}),`\n`,_jsxs(_components.ol,{start:`6`,children:[`\n`,_jsx(_components.li,{children:`To check that your QuickBooks setup and External Mappings configuration is correct, you can now:`}),`\n`]}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`In your m3ter Organization, generate a Bill for the `,_jsx(_components.strong,{children:`Account`}),` and then Approve the Bill. This will activate your QuickBooks integration and the Bill will be sent outbound to your QuickBooks system.`]}),`\n`,_jsxs(_components.li,{children:[`In your QuickBooks system, go to `,_jsx(_components.strong,{children:`Sales>Invoices`}),` and confirm that an invoice has been created for the respective `,_jsx(_components.strong,{children:`Customer`}),` and that line item amounts are correct.`]}),`\n`]})]})}function MDXContent(props={}){const{wrapper:MDXLayout}={..._provideComponents(),...props.components};return MDXLayout?_jsx(MDXLayout,{...props,children:_jsx(_createMdxContent,{...props})}):_createMdxContent(props)}return{default:MDXContent};function _missingMdxReference(id,component){throw new Error(`Expected `+(component?`component`:`object`)+\" `\"+id+\"` to be defined: you likely forgot to import, pass, or provide it.\")}","frontmatter":{},"scope":{"config":{},"pageMetadata":{"title":"Configuring QuickBooks Integrations","description":null,"href":"/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations"}}},"mdxSourceWithNoJs":null},"mdxExtracts":{"tableOfContents":[{"title":"Creating the Integration","slug":"creating-the-integration","depth":2,"children":[]},{"title":"Setting Up Authentication for the Integration","slug":"setting-up-authentication-for-the-integration","depth":2,"children":[]},{"title":"Setting up QuickBooks and Required External Mappings in m3ter","slug":"setting-up-quickbooks-and-required-external-mappings-in-m3ter","depth":2,"children":[]}],"codeExamples":{}},"jsLinks":[],"subdomain":"m3ter","siteName":"m3ter Documentation","title":"Configuring QuickBooks Integrations - m3ter Documentation","navMaps":{"firstHrefInVersion":{},"firstHrefInLanguage":{}},"lastModified":"2026-11-18T10:32:26.960Z","originalFileLocation":"guides/integrations/setting-up-integrations/configuring-quickbooks-integrations.mdx"},"headHtml":"\u003cscript data-mint-head>(function(){var d=document.documentElement,p=null;if(!p){try{p=localStorage.getItem(\"isDarkMode\")}catch(e){}if(p==='true')p='dark';else if(p==='false')p='light';if(p!=='light'\u0026\u0026p!=='dark'\u0026\u0026p!=='system')p=\"system\"}var r=p==='system'?(matchMedia(\"(prefers-color-scheme: dark)\").matches?'dark':'light'):p;d.classList.remove(r==='dark'?'light':'dark');d.classList.add(r);d.setAttribute(\"data-theme-preference\",p)})();\u003c/script>\u003cmeta data-mint-head name=\"application-name\" content=\"m3ter Documentation\">\u003cmeta data-mint-head name=\"generator\" content=\"Mintlify\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/m3ter/zwvZvZyvpa8TKV7c/_generated/favicon/android-chrome-192x192.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"apple-touch-icon\" type=\"image/png\" sizes=\"180x180\" href=\"/mintlify-assets/_mintlify/favicons/m3ter/zwvZvZyvpa8TKV7c/_generated/favicon/apple-touch-icon.png\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/m3ter/zwvZvZyvpa8TKV7c/_generated/favicon/favicon-16x16.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/m3ter/zwvZvZyvpa8TKV7c/_generated/favicon/favicon-32x32.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/m3ter/zwvZvZyvpa8TKV7c/_generated/favicon/favicon.ico\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/m3ter/zwvZvZyvpa8TKV7c/_generated/favicon-dark/android-chrome-192x192.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/m3ter/zwvZvZyvpa8TKV7c/_generated/favicon-dark/favicon-16x16.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/m3ter/zwvZvZyvpa8TKV7c/_generated/favicon-dark/favicon-32x32.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/m3ter/zwvZvZyvpa8TKV7c/_generated/favicon-dark/favicon.ico\" media=\"(prefers-color-scheme: dark)\">\u003cmeta data-mint-head property=\"og:title\" content=\"Configuring QuickBooks Integrations - m3ter Documentation\">\u003cmeta data-mint-head property=\"og:site_name\" content=\"m3ter Documentation\">\u003cmeta data-mint-head property=\"og:url\" content=\"https://docs.m3ter.com/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations\">\u003cmeta data-mint-head property=\"og:type\" content=\"website\">\u003cmeta data-mint-head property=\"og:image\" content=\"https://m3ter.mintlify.site/_mintlify/api/og/v2?division=Setting+Up+and+Managing+Integrations\u0026amp;title=Configuring+QuickBooks+Integrations\u0026amp;theme=f65f867c9d6db06823eaf387\u0026amp;signature=3aae61d14c1a5bec79b513442e0fd5007e22cb6b07a842c11909ac2d238a61df\">\u003cmeta data-mint-head property=\"og:image:width\" content=\"1200\">\u003cmeta data-mint-head property=\"og:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"twitter:card\" content=\"summary_large_image\">\u003cmeta data-mint-head name=\"twitter:title\" content=\"Configuring QuickBooks Integrations - m3ter Documentation\">\u003cmeta data-mint-head name=\"twitter:image\" content=\"https://m3ter.mintlify.site/_mintlify/api/og/v2?division=Setting+Up+and+Managing+Integrations\u0026amp;title=Configuring+QuickBooks+Integrations\u0026amp;theme=f65f867c9d6db06823eaf387\u0026amp;signature=3aae61d14c1a5bec79b513442e0fd5007e22cb6b07a842c11909ac2d238a61df\">\u003cmeta data-mint-head name=\"twitter:image:width\" content=\"1200\">\u003cmeta data-mint-head name=\"twitter:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"msapplication-config\" content=\"/mintlify-assets/_mintlify/favicons/m3ter/zwvZvZyvpa8TKV7c/_generated/favicon/browserconfig.xml\">\u003cmeta data-mint-head name=\"apple-mobile-web-app-title\" content=\"m3ter Documentation\">\u003cmeta data-mint-head name=\"msapplication-TileColor\" content=\"#4caf4c\">\u003clink data-mint-head rel=\"canonical\" href=\"https://docs.m3ter.com/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations\">\u003clink data-mint-head rel=\"alternate\" type=\"application/xml\" href=\"/sitemap.xml\">\u003clink data-mint-head rel=\"alternate\" type=\"text/markdown\" href=\"/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations.md\">\u003cscript data-mint-head type=\"application/ld+json\">{\"@context\":\"https://schema.org\",\"@graph\":[{\"@type\":\"Organization\",\"@id\":\"https://docs.m3ter.com/#organization\",\"name\":\"m3ter Documentation\",\"url\":\"https://docs.m3ter.com\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https://mintcdn.com/m3ter/t6C65JBQiQOFtjBy/images/m3ter-logo-blue-sf.svg?fit=max\u0026auto=format\u0026n=t6C65JBQiQOFtjBy\u0026q=85\u0026s=3928db28c84ec6950e43caf96e635d80\"}},{\"@type\":\"WebSite\",\"@id\":\"https://docs.m3ter.com#website\",\"name\":\"m3ter Documentation\",\"url\":\"https://docs.m3ter.com\",\"publisher\":{\"@id\":\"https://docs.m3ter.com/#organization\"}},{\"@type\":\"WebPage\",\"@id\":\"https://docs.m3ter.com/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations#webpage\",\"url\":\"https://docs.m3ter.com/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations\",\"name\":\"Configuring QuickBooks Integrations\",\"dateModified\":\"2026-11-18T10:32:26.960Z\",\"isPartOf\":{\"@id\":\"https://docs.m3ter.com#website\"},\"breadcrumb\":{\"@id\":\"https://docs.m3ter.com/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations#breadcrumb\"}},{\"@type\":\"BreadcrumbList\",\"@id\":\"https://docs.m3ter.com/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Guides\",\"item\":\"https://docs.m3ter.com/guides/getting-started/quick-start-worked-example\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"m3sh\",\"item\":\"https://docs.m3ter.com/guides/m3sh-automation\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Integrations\",\"item\":\"https://docs.m3ter.com/guides/integrations\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"Setting Up and Managing Integrations\",\"item\":\"https://docs.m3ter.com/guides/integrations/setting-up-integrations\"},{\"@type\":\"ListItem\",\"position\":5,\"name\":\"Configuring QuickBooks Integrations\",\"item\":\"https://docs.m3ter.com/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations\"}]},{\"@type\":[\"Article\",\"TechArticle\"],\"@id\":\"https://docs.m3ter.com/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations#article\",\"headline\":\"Configuring QuickBooks Integrations\",\"name\":\"Configuring QuickBooks Integrations\",\"url\":\"https://docs.m3ter.com/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations\",\"mainEntityOfPage\":{\"@id\":\"https://docs.m3ter.com/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations#webpage\"},\"dateModified\":\"2026-11-18T10:32:26.960Z\",\"publisher\":{\"@id\":\"https://docs.m3ter.com/#organization\"},\"isPartOf\":{\"@id\":\"https://docs.m3ter.com#website\"}}]}\u003c/script>\u003cscript data-mint-head type=\"application/ld+json\">{\"@context\":\"https://schema.org\",\"@type\":\"WebSite\",\"name\":\"m3ter Documentation\",\"publisher\":{\"@type\":\"Organization\",\"name\":\"m3ter Documentation\"},\"provider\":{\"@type\":\"Organization\",\"name\":\"Mintlify\",\"url\":\"https://mintlify.com\"}}\u003c/script>","agentPointerHref":"/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations.md","siteName":"m3ter Documentation","nav":{"global":null,"tabs":[{"tab":"Exploring m3ter","pages":[{"title":"Exploring m3ter","href":""}]},{"tab":"Guides","pages":[{"group":"Guides","pages":[{"group":"Getting Started","root":{"title":"Getting Started","href":"/guides/getting-started"},"expanded":false,"pages":[{"title":"Quick Start","href":"/guides/getting-started/quick-start-worked-example"},{"title":"m3ter Console","href":"/guides/getting-started/working-in-the-m3ter-console"},{"title":"Configuration Workflow","href":"/guides/getting-started/previewing-main-configuration-steps"},{"group":"Worked Examples","expanded":false,"pages":[{"title":"Worked Examples","href":"/guides/getting-started/metering-for-production-worked-examples"},{"title":"Example 1: Cloud Storage and File Cleanup","href":"/guides/getting-started/metering-for-production-worked-examples/worked-example-1-cloud-storage-and-file-cleanup"},{"title":"Example 2: Compound Aggregation for Sign-Up Bonus","href":"/guides/getting-started/metering-for-production-worked-examples/example-2-compound-aggregation-for-sign-up-bonus"},{"title":"Example 3: Segmented Aggregation on Single Meter Usage","href":"/guides/getting-started/metering-for-production-worked-examples/example-3-segmented-aggregation-on-single-meter-usage"}]},{"title":"Dates in m3ter - Quick Reference Starter","href":"/guides/getting-started/working-with-dates-in-m3ter-easy-reference"},{"title":"Feature Release Stages","href":"/guides/getting-started/feature-release-stages"},{"title":"Knowledge Index","href":"/guides/getting-started/knowledge-index"},{"title":"Contacting m3ter Support","href":"/guides/getting-started/contacting-m3ter-support"}]},{"group":"Authentication","root":{"title":"Authentication","href":"/guides/authenticating-with-the-platform"},"expanded":false,"pages":[{"title":"User/Password Authentication","href":"/guides/authenticating-with-the-platform/user-password-authentication"},{"title":"m3ter Single Sign-On","href":"/guides/authenticating-with-the-platform/m3ter-single-sign-on"},{"title":"Service Authentication","href":"/guides/authenticating-with-the-platform/service-authentication"}]},{"group":"Creating, Managing, and Reviewing Products","root":{"title":"Creating, Managing, and Reviewing Products","href":"/guides/creating-and-managing-products"},"expanded":false,"pages":[{"title":"Working with Custom Fields","href":"/guides/creating-and-managing-products/working-with-custom-fields"}]},{"group":"Usage Data: Meters","root":{"title":"Usage Data: Meters","href":"/guides/usage-data-meters"},"expanded":false,"pages":[{"title":"Reviewing Meter Options","mode":"default","href":"/guides/usage-data-meters/reviewing-meter-options"},{"title":"Creating Product Meters","href":"/guides/usage-data-meters/creating-meters"},{"title":"Creating Global Meters","href":"/guides/usage-data-meters/creating-global-meters"},{"title":"Working in Meter Details","href":"/guides/usage-data-meters/working-in-meter-details"},{"title":"Working with Meter Derived Fields and Examples","href":"/guides/usage-data-meters/derived-fields-for-meters-examples-and-supported-syntax"}]},{"group":"Pricing Metrics: Aggregations","root":{"title":"Pricing Metrics: Aggregations","href":"/guides/usage-data-aggregations"},"expanded":false,"pages":[{"title":"Reviewing Aggregation Options","href":"/guides/usage-data-aggregations/reviewing-aggregation-options"},{"title":"Creating Product Aggregations","href":"/guides/usage-data-aggregations/creating-aggregations"},{"title":"Creating Global Aggregations","href":"/guides/usage-data-aggregations/creating-global-aggregations"},{"title":"Compound Aggregations","href":"/guides/usage-data-aggregations/compound-aggregations"},{"title":"Working with Compound Aggregation Calculations","href":"/guides/usage-data-aggregations/compound-aggregation-calculations"},{"title":"Compound Aggregations - Examples","href":"/guides/usage-data-aggregations/compound-aggregations-examples"},{"title":"Segmented Aggregations","href":"/guides/usage-data-aggregations/segmented-aggregations"},{"title":"Custom SQL Aggregations","href":"/guides/usage-data-aggregations/custom-sql-aggregations"},{"title":"Reviewing Aggregation Details","href":"/guides/usage-data-aggregations/reviewing-aggregation-details"}]},{"group":"Recurring Charges: Counters","root":{"title":"Recurring Charges: Counters","href":"/guides/recurring-charges-counters"},"expanded":false,"pages":[{"title":"Creating Counters and Pricing Plans","href":"/guides/recurring-charges-counters/creating-counters"},{"title":"Understanding and Creating Counter Adjustments for Accounts","href":"/guides/recurring-charges-counters/creating-counter-adjustments-for-accounts"},{"title":"Recurring Charges Billing: Seat-Based Pricing","href":"/guides/recurring-charges-counters/reviewing-bills-for-recurring-charges"},{"title":"Recurring Charges Billing: Hybrid Pricing","href":"/guides/recurring-charges-counters/recurring-charges-example-2-hybrid-pricing"}]},{"group":"Plans and Pricing","root":{"title":"Plans and Pricing","href":"/guides/plans-and-pricing"},"expanded":false,"pages":[{"group":"Creating and Working with Plan Templates, Plans, and Plan Groups","root":{"title":"Creating and Working with Plan Templates, Plans, and Plan Groups","href":"/guides/plans-and-pricing/working-with-plan-templates-and-plans"},"expanded":false,"pages":[{"title":"Reviewing Options for Plans and Plan Templates","href":"/guides/plans-and-pricing/working-with-plan-templates-and-plans/reviewing-configuration-options-for-plans-and-plan-templates"},{"title":"Understanding Billing Options for Plan Templates/Plans","href":"/guides/plans-and-pricing/working-with-plan-templates-and-plans/understanding-billing-options-for-plan-templates-plans"},{"title":"Creating Plan Templates","href":"/guides/plans-and-pricing/working-with-plan-templates-and-plans/creating-plan-templates"},{"title":"Creating Plans","href":"/guides/plans-and-pricing/working-with-plan-templates-and-plans/creating-plans"},{"title":"Working in Plan Template and Plan Details","href":"/guides/plans-and-pricing/working-with-plan-templates-and-plans/working-in-plan-details"},{"title":"Editing and Deleting Plan Templates and Plans","href":"/guides/plans-and-pricing/working-with-plan-templates-and-plans/editing-plan-templates-and-plans"},{"title":"Working with Plan Groups","href":"/guides/plans-and-pricing/working-with-plan-templates-and-plans/working-with-plan-groups"}]},{"group":"Pricing and Managing Plans and Plan Templates","root":{"title":"Pricing and Managing Plans and Plan Templates","href":"/guides/plans-and-pricing/pricing-plans"},"expanded":false,"pages":[{"title":"Reviewing Pricing Options for Plans and Plan Templates","href":"/guides/plans-and-pricing/pricing-plans/reviewing-pricing-options-and-pricing-plans"},{"title":"Pricing Plans and Plan Templates","href":"/guides/plans-and-pricing/pricing-plans/pricing-plans"},{"title":"Pricing Plans Using Segmented Aggregations","href":"/guides/plans-and-pricing/pricing-plans/pricing-plans-using-segmented-aggregations"},{"title":"Managing and Editing Priced Plans and Plan Templates","href":"/guides/plans-and-pricing/pricing-plans/managing-and-editing-priced-plans-or-plan-templates"},{"title":"Duplicating Priced Plans and Plan Templates","href":"/guides/plans-and-pricing/pricing-plans/duplicating-priced-plans-or-plan-templates"}]}]},{"group":"End-Customer Accounts","root":{"title":"End-Customer Accounts","href":"/guides/end-customer-accounts"},"expanded":false,"pages":[{"title":"Managing Accounts - Best Practices","href":"/guides/end-customer-accounts/managing-accounts-best-practices"},{"title":"Creating and Managing Accounts","href":"/guides/end-customer-accounts/creating-an-account"},{"title":"Attaching Plans to an Account","href":"/guides/end-customer-accounts/attaching-plans-to-an-account"},{"title":"Creating Custom Plans for Accounts","href":"/guides/end-customer-accounts/creating-custom-account-plans"},{"title":"Attaching Plan Groups to an Account","href":"/guides/end-customer-accounts/attaching-plan-groups-to-an-account"},{"title":"Creating Custom Plan Groups for Accounts","href":"/guides/end-customer-accounts/creating-custom-plan-groups-for-accounts"},{"title":"Creating Prepayments for Accounts","href":"/guides/end-customer-accounts/creating-prepayments-for-accounts"},{"group":"Working with Contracts for Accounts","root":{"title":"Working with Contracts for Accounts","href":"/guides/end-customer-accounts/creating-contracts-for-accounts"},"expanded":false,"pages":[{"title":"Creating and Managing Contracts","href":"/guides/end-customer-accounts/creating-contracts-for-accounts/creating-and-managing-contracts"},{"title":"Setting Up Contract Billing","href":"/guides/end-customer-accounts/creating-contracts-for-accounts/setting-up-contract-billing"},{"title":"Reviewing Organization Contracts","href":"/guides/end-customer-accounts/creating-contracts-for-accounts/reviewing-organization-contracts"}]},{"group":"Working with Balances for Accounts","root":{"title":"Working with Balances for Accounts","href":"/guides/end-customer-accounts/creating-balances-for-accounts"},"expanded":false,"pages":[{"title":"Understanding and Managing Billing for Balances","href":"/guides/end-customer-accounts/creating-balances-for-accounts/understanding-billing-for-balances"},{"title":"Creating and Managing Account Balances","href":"/guides/end-customer-accounts/creating-balances-for-accounts/creating-and-managing-account-balances"},{"title":"Creating and Managing Transactions for Balances","href":"/guides/end-customer-accounts/creating-balances-for-accounts/creating-and-managing-transactions-for-balances"},{"title":"Setting Up Transaction Schedules for Balances","href":"/guides/end-customer-accounts/creating-balances-for-accounts/setting-transaction-schedules-for-balances"},{"title":"Creating Charges for Balances","href":"/guides/end-customer-accounts/creating-balances-for-accounts/creating-charges-for-balances"},{"title":"Setting Up Charge Schedules for Balances","href":"/guides/end-customer-accounts/creating-balances-for-accounts/setting-charge-schedules-for-balances"},{"title":"Running and Viewing Bills for Balance Charges","href":"/guides/end-customer-accounts/creating-balances-for-accounts/runnning-viewing-bill-for-balance-charges"},{"title":"Reviewing Account Balances Summary","href":"/guides/end-customer-accounts/creating-balances-for-accounts/reviewing-account-balances-summary"},{"title":"Grants","href":"/guides/end-customer-accounts/creating-balances-for-accounts/balance-grants"}]},{"title":"Creating Charges for Accounts","href":"/guides/end-customer-accounts/creating-charges-for-accounts"},{"title":"Creating Counter Adjustments for Accounts","href":"/guides/end-customer-accounts/creating-counter-adjustments-for-accounts"},{"title":"Submitting Usage Data for an Account","href":"/guides/end-customer-accounts/submitting-usage-data-for-an-account"},{"title":"Working in Account Overview","href":"/guides/end-customer-accounts/working-in-account-overview"},{"title":"Reviewing and Recalculating Bills for an Account","href":"/guides/end-customer-accounts/reviewing-bills-for-an-account"},{"group":"Working with Parent/Child Accounts","root":{"title":"Working with Parent/Child Accounts","href":"/guides/end-customer-accounts/creating-and-working-with-child-accounts"},"expanded":false,"pages":[{"title":"Billing Hierarchy Modes for Parent/Child Accounts","href":"/guides/end-customer-accounts/creating-and-working-with-child-accounts/billing-for-parent-child-accounts"}]},{"title":"End Dating Account Billing Entities","href":"/guides/end-customer-accounts/end-dating-account-billing-entities"},{"title":"Creating and Managing External Mappings for Accounts","href":"/guides/end-customer-accounts/creating-and-managing-external-mappings-for-accounts"}]},{"group":"Billing and Usage Data","root":{"title":"Billing and Usage Data","href":"/guides/billing-and-usage-data"},"expanded":false,"pages":[{"group":"Submitting Usage Data","root":{"title":"Submitting Usage Data","href":"/guides/billing-and-usage-data/submitting-usage-data"},"expanded":false,"pages":[{"title":"API Calls for Data Ingest","href":"/guides/billing-and-usage-data/submitting-usage-data/api-calls-for-data-ingest"},{"title":"File Upload Service API","href":"/guides/billing-and-usage-data/submitting-usage-data/file-upload-service-api"},{"title":"Submitting and Checking Test Usage Data","href":"/guides/billing-and-usage-data/submitting-usage-data/submitting-test-usage-data"},{"title":"File Uploads for Usage Data by Meter","href":"/guides/billing-and-usage-data/submitting-usage-data/file-uploads-for-usage-data-by-meter"},{"title":"Submitting Usage Data Adjustments Using Timestamp","href":"/guides/billing-and-usage-data/submitting-usage-data/submitting-usage-data-adjustments-using-timestamp"},{"title":"Submitting Usage Data for Non-Existent Accounts","href":"/guides/billing-and-usage-data/submitting-usage-data/submitting-usage-data-for-non-existent-accounts"},{"title":"Reviewing and Resolving Ingest Events","href":"/guides/billing-and-usage-data/submitting-usage-data/reviewing-and-resolving-ingest-events"}]},{"group":"Running, Viewing, and Managing Bills","root":{"title":"Running, Viewing, and Managing Bills","href":"/guides/billing-and-usage-data/running-viewing-and-managing-bills"},"expanded":false,"pages":[{"title":"Running Bills and Viewing Bill Details","href":"/guides/billing-and-usage-data/running-viewing-and-managing-bills/running-bills-and-viewing-bill-details"},{"title":"Working with Bills in Bill Management","href":"/guides/billing-and-usage-data/running-viewing-and-managing-bills/managing-bills"},{"title":"Approving and Locking Bills - Managing Bill Lifecycle","href":"/guides/billing-and-usage-data/running-viewing-and-managing-bills/approving-and-locking-bills-managing-bill-lifecycle"},{"title":"Adding Credit Line Items to Bills","href":"/guides/billing-and-usage-data/running-viewing-and-managing-bills/adding-credit-line-items-to-bills"},{"title":"Adding Debit Line Items to Bills","href":"/guides/billing-and-usage-data/running-viewing-and-managing-bills/adding-debit-line-items-to-bills"},{"title":"Viewing Bill History","href":"/guides/billing-and-usage-data/running-viewing-and-managing-bills/viewing-bill-history"},{"title":"Scheduling Billing","href":"/guides/billing-and-usage-data/running-viewing-and-managing-bills/scheduling-billing"},{"title":"Working with Bill Statements","href":"/guides/billing-and-usage-data/running-viewing-and-managing-bills/working-with-bill-statements"},{"title":"Bill Line Item Types","href":"/guides/billing-and-usage-data/running-viewing-and-managing-bills/bill-line-item-types"},{"title":"Bill Line Items - Default Descriptions","href":"/guides/billing-and-usage-data/running-viewing-and-managing-bills/bill-line-items-default-descriptions"},{"title":"Bill Line Items - Mapping to Accounting Products","href":"/guides/billing-and-usage-data/running-viewing-and-managing-bills/bill-line-items-mapping-accounting-products"},{"title":"Troubleshooting Bills","href":"/guides/billing-and-usage-data/running-viewing-and-managing-bills/troubleshooting-bills"}]}]},{"group":"m3sh","root":{"title":"m3sh","href":"/guides/m3sh-automation"},"expanded":false,"pages":[{"group":"m3sh Workflows","root":{"title":"m3sh Workflows","href":"/guides/m3sh-workflows/m3sh-workflows"},"pages":[{"title":"m3sh Workflows - Key Concepts and Options","href":"/guides/m3sh-workflows/m3sh-workflows-key-concepts-and-options"},{"title":"Exploring m3sh Workflows","href":"/guides/m3sh-automation/exploring-m3sh-workflows"},{"title":"Reviewing m3sh Workflow Runs","href":"/guides/m3sh-automation/reviewing-m3sh-workflow-runs"},{"title":"Getting to Know the Workflow Builder","href":"/guides/m3sh-workflows/getting-to-know-the-workflow-builder"},{"title":"Creating Event Notification Workflows","href":"/guides/m3sh-workflows/creating-event-notification-workflows"},{"title":"Creating Incoming Webhook Workflows","href":"/guides/m3sh-workflows/creating-incoming-webhook-workflows"},{"title":"Working with Global Parameters","href":"/guides/m3sh-workflows/working-with-global-parameters"},{"title":"Utilizing Workflow Managed Templates","href":"/guides/m3sh-workflows/utilizing-workflow-managed-templates"},{"title":"Testing and Troubleshooting Workflows","href":"/guides/m3sh-workflows/testing-and-troubleshooting-workflows"},{"title":"Exporting and Importing Workflows","href":"/guides/m3sh-workflows/exporting-and-importing-workflows"}]},{"group":"Utilizing Events and Notifications","root":{"title":"Utilizing Events and Notifications","href":"/guides/alerts-events-and-notifications/utilizing-events-and-notifications"},"expanded":false,"pages":[{"title":"Key Concepts and Relationships","href":"/guides/alerts-events-and-notifications/utilizing-events-and-notifications/key-concepts-and-relationships"},{"title":"Object Definitions and API Calls","href":"/guides/alerts-events-and-notifications/utilizing-events-and-notifications/object-definitions-and-api-calls"},{"title":"Creating, Managing, and Reviewing Notifications","href":"/guides/alerts-events-and-notifications/utilizing-events-and-notifications/creating-managing-and-reviewing-notifications"},{"title":"Example - Notification Setup for Commitment Updated Event","href":"/guides/alerts-events-and-notifications/utilizing-events-and-notifications/example-1-commitment-updated-event"},{"title":"Working with Scheduled Events","href":"/guides/alerts-events-and-notifications/utilizing-events-and-notifications/working-with-scheduled-events"}]},{"group":"Creating and Managing Credentials","root":{"title":"Creating and Managing Credentials","href":"/guides/integrations/setting-up-integrations/managing-integration-credentials"},"expanded":false,"pages":[{"title":"Creating Stripe Integration Credentials","href":"/guides/integrations/setting-up-integrations/_managing-integration-credentials-legacy/creating-stripe-integration-credentials"},{"title":"Creating NetSuite Integration Credentials","href":"/guides/integrations/setting-up-integrations/_managing-integration-credentials-legacy/creating-netsuite-integration-credentials"},{"title":"Creating Paddle Integration Credentials","href":"/guides/integrations/setting-up-integrations/_managing-integration-credentials-legacy/creating-paddle-integration-credentials"},{"title":"Creating Chargebee Integration Credentials","href":"/guides/integrations/setting-up-integrations/_managing-integration-credentials-legacy/creating-chargebee-integration-credentials"},{"title":"Creating QuickBooks Integration Credentials","href":"/guides/integrations/setting-up-integrations/_managing-integration-credentials-legacy/creating-quickbooks-integration-credentials"},{"title":"Creating Xero Integration Credentials","href":"/guides/integrations/setting-up-integrations/_managing-integration-credentials-legacy/creating-xero-integration-credentials"},{"title":"Creating Salesforce Integration Credentials","href":"/guides/integrations/setting-up-integrations/_managing-integration-credentials-legacy/creating-salesforce-integration-credentials"},{"title":"Creating AWS Marketplace Integration Credentials","href":"/guides/integrations/setting-up-integrations/_managing-integration-credentials-legacy/creating-aws-marketplace-integration-credentials"},{"title":"Creating Azure Marketplace Integration Credentials","href":"/guides/integrations/setting-up-integrations/_managing-integration-credentials-legacy/creating-azure-marketplace-integration-credentials"}]},{"group":"Integrations","root":{"title":"Integrations","href":"/guides/integrations"},"expanded":false,"pages":[{"title":"m3ter Integrations - Overview","sidebarTitle":"m3ter Integrations","href":"/guides/integrations/m3ter-integrations"},{"group":"Setting Up and Managing Integrations","root":{"title":"Setting Up and Managing Integrations","href":"/guides/integrations/setting-up-integrations"},"expanded":false,"pages":[{"title":"Creating and Managing Integrations","href":"/guides/integrations/setting-up-integrations/creating-and-managing-integration-configurations"},{"title":"Configuring Stripe Integrations","href":"/guides/integrations/setting-up-integrations/configuring-stripe-integrations"},{"title":"Configuring NetSuite Integrations","href":"/guides/integrations/setting-up-integrations/configuring-netsuite-integrations"},{"title":"Configuring Paddle Integrations","href":"/guides/integrations/setting-up-integrations/configuring-paddle-integrations"},{"title":"Configuring Chargebee Integrations","description":null,"href":"/guides/integrations/setting-up-integrations/configuring-chargebee-integrations"},{"title":"Configuring QuickBooks Integrations","href":"/guides/integrations/setting-up-integrations/configuring-quickbooks-integrations"},{"title":"Configuring Xero Integrations","description":null,"href":"/guides/integrations/setting-up-integrations/configuring-xero-integrations"},{"title":"Configuring Salesforce Entity Data Sync Integrations","href":"/guides/integrations/setting-up-integrations/configuring-sf-entity-data-integrations"},{"title":"Configuring AWS Marketplace Integrations","href":"/guides/integrations/setting-up-integrations/configuring-aws-integrations"},{"title":"AWS Marketplace Integrations - Reconciliation Features","href":"/guides/integrations/setting-up-integrations/aws-marketplace-integrations-reconciliation-features"},{"title":"Configuring Azure Marketplace Integrations","href":"/guides/integrations/setting-up-integrations/configuring-azure-marketplace-integrations"},{"title":"Azure Marketplace Integrations - Reconciliation Features","href":"/guides/integrations/setting-up-integrations/azure-marketplace-integrations-reconciliation-features"},{"title":"Managing Multiple Third Party Destinations for Integrations","href":"/guides/integrations/setting-up-integrations/managing-multiple-destinations-for-integrations"},{"title":"Reviewing Integration Run Details","href":"/guides/integrations/setting-up-integrations/reviewing-integration-run-details"}]}]},{"title":"Creating and Managing Outgoing Webhooks","href":"/guides/integrations/setting-up-integrations/creating-and-managing-destinations"},{"title":"Reviewing and Resolving Integration Events","href":"/guides/integrations/setting-up-integrations/reviewing-and-resolving-integration-events"},{"title":"Creating and Managing External Mappings","href":"/guides/integrations/setting-up-integrations/creating-and-managing-external-mappings"},{"title":"Creating and Managing Transformations","href":"/guides/m3sh-workflows/creating-and-managing-transformations"}]},{"group":"m3ter APIs","root":{"title":"m3ter APIs","href":"/guides/m3ter-apis"},"expanded":false,"pages":[{"title":"Config API Limits","href":"/guides/m3ter-apis/config-api-limits"},{"title":"Ingest API Limits and Optimizing Measurement Submissions","href":"/guides/m3ter-apis/ingest-api-limits"},{"title":"WAF Rules for HTTP Requests","href":"/guides/m3ter-apis/waf-rules-for-http-requests"},{"title":"Getting Started with API Calls","href":"/guides/m3ter-apis/getting-started-with-api-calls"},{"title":"HTTP Error Codes","href":"/guides/m3ter-apis/http-error-codes"}]},{"title":"m3ter Calculation Engine","href":"/guides/m3ter-calculation-engine"},{"group":"Lookup Tables","root":{"title":"Lookup Tables (Beta)","href":"/guides/lookup-tables"},"tag":"Beta","expanded":false,"pages":[{"title":"Creating and Managing Lookup Tables","href":"/guides/lookup-tables/creating-and-managing-lookup-tables"},{"title":"Adding Data to, Publishing, and Managing Lookup Table Revisions","href":"/guides/lookup-tables/adding-data-to-and-publishing-table-revisions"},{"title":"Worked Example - Variable Usage Discounting","href":"/guides/lookup-tables/worked-example-variable-usage-discounting"},{"title":"Worked Example - Variable Usage Discounting by Account","href":"/guides/lookup-tables/worked-example-variable-usage-discouting-by-account"},{"title":"Lookup Functions","href":"/guides/lookup-tables/lookup-functions"}]},{"title":"System Alerts","href":"/guides/alerts-events-and-notifications/viewing-and-managing-alerts"},{"group":"Organization and Access Management","root":{"title":"Organization and Access Management","href":"/guides/organization-and-access-management"},"expanded":false,"pages":[{"group":"Managing your Organization","root":{"title":"Managing your Organization","href":"/guides/organization-and-access-management/viewing-and-editing-organization"},"expanded":false,"pages":[{"title":"Viewing and Editing Organization Configuration","href":"/guides/organization-and-access-management/viewing-and-editing-organization/viewing-and-editing-organization-configuration"},{"title":"Timezone Settings - Notes and Recommendations","href":"/guides/organization-and-access-management/viewing-and-editing-organization/timezone-settings-notes-and-recommendations"},{"title":"Creating and Managing Currencies","href":"/guides/organization-and-access-management/viewing-and-editing-organization/creating-and-managing-currencies"},{"title":"Creating Credit Reasons","href":"/guides/organization-and-access-management/viewing-and-editing-organization/creating-credit-reasons"},{"title":"Creating Debit Reasons","href":"/guides/organization-and-access-management/viewing-and-editing-organization/creating-debit-reasons"},{"title":"Creating Transaction Types","href":"/guides/organization-and-access-management/viewing-and-editing-organization/creating-transaction-types"},{"title":"Adding and Editing Custom Fields","href":"/guides/organization-and-access-management/viewing-and-editing-organization/adding-and-editing-custom-fields"}]},{"title":"Understanding, Creating, and Managing Permission Policies","href":"/guides/organization-and-access-management/creating-and-managing-permissions"},{"group":"Managing Access and Users","root":{"title":"Managing Access and Users","href":"/guides/organization-and-access-management/managing-users"},"expanded":false,"pages":[{"title":"Managing Users and Assigning Permission Policies","href":"/guides/organization-and-access-management/managing-users/managing-users-and-assigning-permission-policies"},{"title":"Creating and Configuring Service Users","href":"/guides/organization-and-access-management/managing-users/creating-and-configuring-service-users"},{"title":"Creating and Managing User Groups","href":"/guides/organization-and-access-management/managing-users/creating-and-managing-user-groups"},{"title":"Inviting Users to Organization","href":"/guides/organization-and-access-management/managing-users/inviting-users-to-organization"},{"title":"Tracking User Activity in Organization","href":"/guides/organization-and-access-management/managing-users/tracking-user-activity-in-organization"},{"title":"Granting m3ter Support Access to Organization","href":"/guides/organization-and-access-management/managing-users/granting-m3ter-support-access-to-organization"},{"title":"Viewing and Managing Permission Policies","href":"/guides/organization-and-access-management/managing-users/viewing-and-managing-permission-policies"}]}]},{"group":"m3ter Connector for Salesforce","root":{"title":"m3ter Connector for Salesforce","href":"/guides/m3ter-connector-for-salesforce"},"expanded":false,"pages":[{"title":"Overview - Functional Scope and Limitations","href":"/guides/m3ter-connector-for-salesforce/overview-functional-scope-and-limitations"},{"title":"Configuring the m3ter Connector for Salesforce","href":"/guides/m3ter-connector-for-salesforce/configuring-m3ter-salesforce-connector"},{"title":"Reviewing and Managing Metadata Mappings","href":"/guides/m3ter-connector-for-salesforce/reviewing-and-managing-metadata-mappings"},{"title":"Creating Custom Metadata Mappings","href":"/guides/m3ter-connector-for-salesforce/creating-metadata-mappings"},{"title":"Testing Sync Setup from Salesforce to m3ter","href":"/guides/m3ter-connector-for-salesforce/testing-sync-setup-from-salesforce-to-m3ter"},{"title":"Setting Up and Using Sync to m3ter Invocable Action","href":"/guides/m3ter-connector-for-salesforce/setting-up-invocable-action-for-event-driven-sync"},{"title":"Setting Up Sync for End Dating m3ter Account Billing Entities","href":"/guides/m3ter-connector-for-salesforce/setting-up-sync-for-end-dating-m3ter-account-billing-entities"},{"title":"Enabling Two-Way Automated Sync for m3ter Objects","href":"/guides/m3ter-connector-for-salesforce/enabling-two-way-automated-sync-for-m3ter-objects"},{"title":"Mapping Custom Fields on m3ter Entities","href":"/guides/m3ter-connector-for-salesforce/mapping-custom-fields-on-m3ter-entities"},{"title":"Mapping Segment Attributes for Pricing","href":"/guides/m3ter-connector-for-salesforce/mapping-segment-attributes-for-pricing"},{"title":"Setting Up m3sh Webhook Triggers","href":"/guides/m3ter-connector-for-salesforce/setting-up-m3sh-webhook-triggers"},{"title":"CRUD for Metering Entities","href":"/guides/m3ter-connector-for-salesforce/crud-for-metering-entities"},{"title":"Usage Design Targets","href":"/guides/m3ter-connector-for-salesforce/usage-design-targets"},{"title":"Generic m3ter API Invocable Action","href":"/guides/m3ter-connector-for-salesforce/generic-m3ter-api-invocable-action"},{"title":"Product Mapping Resolution","href":"/guides/m3ter-connector-for-salesforce/product-mapping-resolution"},{"title":"Checking Sync Logs and Troubleshooting","href":"/guides/m3ter-connector-for-salesforce/checking-sync-logs-and-troubleshooting"},{"group":"m3ter Connector - Sample Mappings","root":{"title":"m3ter Connector - Sample Mappings","href":"/guides/m3ter-connector-for-salesforce/m3ter-connector-sample-mappings"},"expanded":false,"pages":[{"title":"Sample Mappings 1 - Account","href":"/guides/m3ter-connector-for-salesforce/m3ter-connector-sample-mappings/sample-mapping-1-account"},{"title":"Sample Mappings 2 - Commitment","href":"/guides/m3ter-connector-for-salesforce/m3ter-connector-sample-mappings/sample-mappings-2-commitment"},{"title":"Sample Mappings 3 - Contract","href":"/guides/m3ter-connector-for-salesforce/m3ter-connector-sample-mappings/sample-mappings-3-contract"},{"title":"Sample Mappings 4 - AccountPlan","href":"/guides/m3ter-connector-for-salesforce/m3ter-connector-sample-mappings/sample-mappings-4-accountplan"},{"title":"Sample Mappings 5 - Plan","href":"/guides/m3ter-connector-for-salesforce/m3ter-connector-sample-mappings/sample-mappings-5-plan"},{"title":"Sample Mappings 6 - Pricing","href":"/guides/m3ter-connector-for-salesforce/m3ter-connector-sample-mappings/sample-mappings-6-pricing"},{"title":"Sample Mappings 7 - Pricing Bands","href":"/guides/m3ter-connector-for-salesforce/m3ter-connector-sample-mappings/sample-mappings-7-pricing-bands"}]},{"title":"m3ter Connector for Salesforce - Changelog","href":"/guides/m3ter-connector-for-salesforce/m3ter-connector-for-salesforce-changelog"}]},{"group":"Data Explorers","root":{"title":"Data Explorers","href":"/guides/data-explorer"},"expanded":false,"pages":[{"title":"Usage Data Explorer","href":"/guides/data-explorer/performing-usage-queries-and-reviewing-results"},{"title":"Usage Data Explorer (v2)","href":"/guides/data-explorer/usage-data-explorer-v2"},{"title":"Billing Data Explorer","href":"/guides/data-explorer/performing-billing-queries-and-reviewing-results"},{"title":"Prepayments Data Explorer","href":"/guides/data-explorer/performing-commitments-queries-and-reviewing-results"},{"title":"Data Explorers: Saving, Updating, and Re-Using Queries","href":"/guides/data-explorer/saving-queries"},{"title":"Data Explorers: Exporting Query Results","href":"/guides/data-explorer/exporting-usage-query-results"}]},{"title":"Audit Logs (Preview)","href":"/audit-logs"},{"group":"Data Exports","root":{"title":"Data Exports (Preview)","href":"/guides/data-exports"},"tag":"Preview","expanded":false,"pages":[{"title":"Creating and Managing Export Destinations","href":"/guides/data-exports/creating-data-export-destinations"},{"group":"Creating Usage Data Export Schedules","root":{"title":"Creating Usage Data Export Schedules","href":"/guides/data-exports/creating-export-schedules"},"expanded":false,"pages":[{"title":"Creating Legacy Usage Data Export Schedules","href":"/guides/data-exports/creating-export-schedules/creating-legacy-usage-export-schedules"}]},{"title":"Creating Operational Data Export Schedules","href":"/guides/data-exports/creating-operational-data-export-schedules"},{"title":"Reviewing and Managing Export Schedules","href":"/guides/data-exports/reviewing-and-managing-export-schedules"},{"group":"Running Ad-Hoc Usage Data Exports","root":{"title":"Running Ad-Hoc Usage Data Exports","href":"/guides/data-exports/running-ad-hoc-data-exports"},"expanded":false,"pages":[{"title":"Running Ad-Hoc Legacy Usage Data Exports","href":"/guides/data-exports/running-ad-hoc-data-exports/running-ad-hoc-legacy-data-exports"}]},{"title":"Running Ad-Hoc Operational Data Exports","href":"/guides/data-exports/running-ad-hoc-operational-data-exports"},{"title":"Downloading Data Export Files Locally","href":"/guides/data-exports/downloading-data-export-files-locally"},{"title":"Reviewing Export Jobs","href":"/guides/data-exports/reviewing-export-jobs"},{"title":"Data Export - Entity Schema and Relationship Diagram","href":"/guides/data-exports/data-export-object-relationship-diagram"}]}]}]},{"tab":"Glossary","pages":[{"title":"Glossary","href":"/glossary-of-terms"}]},{"tab":"API Reference","pages":[{"title":"API Reference","href":"/api/introduction"}]},{"tab":"m3sh Function Reference","pages":[{"title":"m3sh Function Reference","href":"/m3sh-function-reference/m3ter/introduction"}]},{"tab":"Changelog","pages":[{"title":"Changelog","href":"/changelog"}]}]},"basePath":"","title":"Configuring QuickBooks Integrations - m3ter Documentation","deploymentId":"dpl_DyXGnKeCjZyA3sUdfMJ7FjkdBefg","buildId":"dpl_DyXGnKeCjZyA3sUdfMJ7FjkdBefg","dynamics":["a74be98ba7"],"chunks":["zoom-image-lightbox-BQ4tbj_9.js","lightbox-handle-r17bVUz3.js"]}